Michigan
Michigan Senate committee takes up bills to repeal ban on compensated surrogacy agreements
Alabama passes new law to protect IVF clinics, fertility doctors
The IVF legislation was fast-tracked through the state house and immediately signed into law by Alabama Gov. Kay Ivey.
A Michigan Senate committee heard testimony Thursday on a package of bills aimed at expanding options for assisted reproduction as lawmakers consider a repeal of a decades-old ban on compensated surrogacy for parents who wish to have children, but are unable to carry out a pregnancy themselves.
House Bills 5207-5215 would establish the Fertility Health Care Act, which supporters argue will remove barriers to starting a family through assisted reproduction, like surrogate parenting. Surrogate parenting refers to the process in which a woman will carry a pregnancy and deliver a child for another family.
Michigan has had a ban on compensated surrogacy parenting since 1988. The process has still taken place in Michigan since then, but parents and advocates for surrogacy parenting say there are legal barriers which make it difficult for many in the state to have children if they are unable to through traditional means.
Previous efforts to repeal the ban have failed, but last November lawmakers in the Michigan House voted along party lines to approve a nine-bill package that would repeal the existing ban and establish the Fertility Health Care Act. If the Senate, which has a 20-18 split among Democrats and Republicans, were to pass the bills this year, they would be poised to advance to Gov. Gretchen Whitmer’s desk for her signature.
The Senate Committee on Judiciary, Public Safety and Civil Rights on Thursday took testimony from a group that included legal experts, parents whose children were born through surrogacy and medical practitioners who voiced support for the bills; as well as representatives from Right to Life of Michigan and the Michigan Catholic Conference who oppose the legislation.
Tammy Myers, of Grand Rapids, and her husband had their second and third children — a set of twins, born through surrogacy in 2021 — after Myers was diagnosed with breast cancer six years earlier and was no longer able to carry a pregnancy to term. The twins, a boy and a girl, were born earlier than expected — before the Myers could complete the legal process of adopting the children required by Michigan law.
“Despite being their biological parents and having no opposition to the parentage from our carrier and her husband, my husband and I were denied the rightful recognition on the twins birth certificates,” Myers testified.
“In the early hours of their lives, we had no life-saving medical decision-making power for their care.”
It took nearly two years for the Myers to legally adopt the twins. Myers’ attorney, Melissa Neckers, of Grand Rapids, said Michigan’s existing laws don’t match modern fertility health care practices.
“These cases are happening a lot,” Neckers said. “People are entering into surrogacy agreements all the time in Michigan. The technology exists. People are desperate to have babies and the law has not caught up with that.”
More: Troy woman struck by breast cancer finds surrogacy as a path to motherhood
Supporters for the Fertility Health Care Act said Michigan is the only state which currently has a ban on compensated surrogacy agreements.
The bill package does have opponents — Genevieve Marnon, legislative director for anti-abortion organization Right to Life of Michigan, said the state’s current ban on compensated surrogacy agreements prevents the “buying and selling of children.”
Marnon also raised concerns about the proposed legislation eliminating the penalties associated with current law for using minors or developmentally disabled women as surrogates. The bills considered by the committee Thursday require those entering a surrogate agreement to be at least 21-years-old, complete consultations with medical and mental health professionals and have independent legal representation.
“Our current law strikes a good balance between protecting vulnerable women and children while allowing infertile couples options to expand their families,” Marnon said.
Rebecca Mastee, policy advocate for the Michigan Catholic Conference, also testified in opposition of the bills, raising concerns that the package currently doesn’t detail any requirements for the relationship between two individuals seeking to have a child through surrogacy.
House Rep. Samantha Steckloff, D-Farmington Hills, is the lead sponsor of the package. A survivor of breast cancer, Steckloff told the committee of how she delayed the start of chemotherapy by a month in 2015 to go through in-vitro fertilization (IVF), allowing her and her husband to possibly start a family of their own one day.
“Michigan is the only state in the nation with a criminal ban on surrogacy contracts,” Steckloff said. “Driving these arrangements underground only serves to put prospective parents and the children they hope to raise in legal jeopardy. House Bills 5207-5215 lifts this ban, and more importantly creates a clear legal link between parents and their children born through assisted reproduction.”
Steckloff also referenced a recent ruling in Alabama, where the state’s Supreme Court ruled in February that embryos fertilized through IVF are considered “extrauterine children” and legally protected like any other child. Advocates for IVF warn the ruling could restrict access to the practice if legal protections aren’t put in place.
Additional testimony on the package will take place next week, said Sen. Stephanie Chang, D-Detroit, who chairs the committee. It’s possible members could vote on reporting the bills to the full Senate floor then.
Senate Majority Leader Winnie Brinks, D-Grand Rapids, has voiced support for the legislation, issuing a statement Thursday in which she said: “It is high time our laws evolve to mirror the advances made in assisted reproductive technology, and we are committed to empowering Michiganders to pursue parenthood without unnecessary hurdles.”
Contact Arpan Lobo: alobo@freepress.com. Follow him on X (Twitter) @arpanlobo.
Become a subscriber today.
Michigan
Harmful algal blooms reported on 2 large West Michigan lakes
GRAND RAPIDS, Mich. (WOOD) — Harmful algal blooms have been reported on two notable lakes in West Michigan: Gun Lake and Muskegon Lake.
The Michigan Department of Environment, Great Lakes and Energy says cyanobacteria was reported on Muskegon Lake July 3, but no tests have confirmed it.
The Barry-Eaton District Health Department says a harmful algal bloom was confirmed Thursday on Gun Lake. The lake remains open, but the BEDHD is encouraging visitors to use caution and avoid water that has “visible algae.”
Visitors are encouraged to avoid any contact with water that appears bright green, blue-green, brown or red or has “floating mats of scum.”
Pets should also avoid the water. If they come into contact with the algae, pets should be rinsed off as soon as possible with clean, fresh water.
Exposure to algae can cause a rash or irritation to the skin, eyes, nose and throat. It can also cause stomach cramps, nausea, vomiting, diarrhea, headache, fever and trouble breathing.
“If you become sick, contact your healthcare provider. Seek medical care right away if you have trouble breathing, severe vomiting, or other serious symptoms,” the BEDHD said in a statement. “If your pet was exposed, rinse them well with clean water and do not let them lick their fur until they have been washed. Contact your veterinarian right away if your pet has vomiting, diarrhea, weakness, trouble walking, excessive drooling, shaking, or seizures.”
Harmful algal blooms are powered by the sudden growth of cyanobacteria, also known as blue-green algae. Cyanobacteria occur naturally in lakes, rivers and ponds but is often boosted by a sudden excess of nutrients, often caused by fertilizer runoff from farms or failed septic systems.
They can last for several days and sometimes even months. The water will look “scummy” or like “spilled paint or pea soup.” They are typically found in the summer and fall — usually peaking in August or September and dying off by the end of October.
You can report a suspected harmful algal bloom to EGLE at AlgaeBloom@Michigan.gov or 1.800.662.9278.
Michigan
How two Michigan stamping plants power Stellantis turnaround plan
Sterling Stamping Plant is the largest in the world
Ed Daniels, vice president of North America injection and stamping operations, discusses the process of producing metal parts for Stellantis models.
Warren — Hulking metal presses line one wall of Stellantis NV’s cavernous stamping plant here, punching out the raw shapes of Jeep doors, Dodge hoods and Ram tailgates in rapid succession.
Nearby, swinging yellow robots continue the tightly choreographed work, gluing and pressing and welding smaller components to the sheet metal that eventually will start to resemble the shape of a truck or SUV.
Seven miles north, in Sterling Heights, Stellantis operates an even larger stamping plant — the biggest in the world, at 2.7 million square feet — that does much of the same work, churning out various shapes of steel and aluminum 24 hours a day.
Together, these lesser-known links in the manufacturing supply chain support all of Stellantis’ big North American assembly plants — from next-door Warren Truck Assembly Plant, where the Jeep Grand Wagoneer SUV is built, to facilities in Windsor and Mexico that make minivans and pickups.
Inside Stellantis’ Huge Detroit Stamping Plants
The Detroit News recently got a rare look inside the automaker’s Sterling and Warren stamping plants, which are key to the company’s turnaround plan.
The Metro Detroit stamping plants, the automaker’s only two such facilities in the United States, have at times struggled in recent years, facing major job cuts and worker morale issues amid slowing sales and shifting production plans. But under Stellantis CEO Antonio Filosa, the facilities are expected to cram in more workload — and add staff — as Stellantis begins a new five-year strategic turnaround plan, which includes a heavy focus on its most profitable North American market.
The carmaker’s goal: grow sales by more than a third to 1.9 million annually by 2030 as it launches 23 vehicles, including 11 all-new models. The company also is directing billions of dollars of investment into its U.S. manufacturing footprint due to President Donald Trump’s tariffs.
“Stamping has never really been viewed as the sexy side of automotive manufacturing, we’re relatively invisible,” said Ed Daniels Jr., vice president of North America injection and stamping operations. “Because when you look at the commercials and advertisements, it’s always a beautiful Ram rolling off the assembly line or climbing the side of a mountain.
“But we’re the inception of that vehicle,” he said. “This is where raw materials are turned into commodities and parts.”
The Detroit News recently got a rare look inside the two plants that combined employ about 3,000 people. The automaker wanted to show off a newly-installed blanking press at Warren Stamping and other machinery like a high-speed transfer press and a robot that spots flaws in the metal.
Hiring expected
The blanking press unspools long coils of metal and chops them up into pieces that can then be shaped into roofs, fenders and floor pans. Stellantis shipped the massive machine to Warren from its idled Belvidere Assembly Plant in Illinois last year.
After upgrades to the machine, executives said it’s able to produce as many as 120,000 metal blanks per week. It will save Stellantis money since the plant will no longer need to pay a supplier to break down the coils before the metal arrives there.
The blanker addition is a big deal for the plant and signals that the company wants to bring more work in-house and invest in the facility over the coming years, said Romaine McKinney III, president of United Auto Workers Local 869, which represents workers at the factory.
The plant has already brought back all of its laid-off UAW workers, and McKinney said he anticipates more hiring to get underway if sales grow and new Stellantis vehicles come to market.
In another corner of the Warren facility, one of the fastest press lines in the world — known internally as the Hellcat — pushes as many as 15 pieces of metal through per minute. Dies that weigh up to 50 tons apiece squish the material into the shapes of doors and hoods before robotic arms snatch them out and place them on conveyor belts. Midway through a shift, workers can reconfigure the machine to make a different component, a process that takes just five minutes.
Robots check for quality
Curtis Booth, who manages Warren Stamping, said manual processes inside the plant have become increasingly automated, and safer, over the last couple decades, even as the automaker’s two stamping factories still utilize some presses that were installed in the 1960s.
The latest high-tech addition is the Automated Body Inspection System, or ABIS. It’s a camera system mounted on a robot that automatically checks the quality of components and flags anything in need of repair.
Auto plants of all kinds are increasingly turning to these types of camera systems, infused with artificial intelligence, to catch flaws in sheet metal and other components before they are shipped. Booth said worker visual inspections are still used. But in some cases the human eye has too much subjectivity, and the ABIS removes the guesswork.
Greg Bauer, who manages Sterling Stamping, said his plant has added staff over the past year, and expects to continue hiring as more work is assigned to the facility. There is no space at the plant to add more presses, but officials have figured out how to increase efficiency — quickly toggling back and forth between making doors for a Chrysler Pacifica and Dodge Charger on on a single machine, for example.
“We want to bring high-volume parts into the plant, and we want to maximize the capacity of the equipment,” Daniels said.
lramseth@detroitnews.com
Michigan
Menominee, Michigan man arrested on sexual assault charges involving a minor
MENOMINEE, Mich. (WLUK) — 24-year-old Ethan Raymond Masters of Menominee was arrested on sexual assault charges June 30th, according to the Menominee County Sheriff’s Office.
According to a news release from the Sheriff’s Office, deputies learned of an incident involving a 24-year-old man and a 12-year-old girl which happened in Menominee June 22nd. Following a sexual assault investigation, police charged Masters.
Masters was arraigned July 2nd on 2 counts of Criminal Sexual Conduct First Degree. He remains in the Menominee County Jail on a $250,000 cash bond.
Menominee City Police and the Michigan State Police Crime Laboratory of Marquette assisted with the investigation.
-
Los Angeles, Ca40 minutes agoKnee irritation forces Shohei Ohtani out of Friday start, All‑Star game
-
Detroit, MI1 hour agoDetroit Evening Report: Waymo cars blocking first responders – WDET 101.9 FM
-
San Francisco, CA1 hour agoSan Francisco Mayor Daniel Lurie Blocks Vacant Grocery Store Tax Proposal | KQED
-
Miami, FL1 hour agoOregon Battling Miami, Mario Cristobal for Four-Star EDGE Recruit
-
Dallas, TX1 hour agoFC Dallas Forward Logan Farrington Inks Contract Extension
-
Boston, MA1 hour agoRed Sox face lengthy travel issues ahead of series vs. Mets
-
Denver, CO2 hours agoWhat’s going on with the Nuggets? Unpacking an NBA offseason on hold
-
Seattle, WA2 hours agoSeattle Kraken Sign Goaltender Victor Östman and Defenseman Ville Ottavainen to One-Year Deals | Seattle Kraken