Connect with us

Connecticut

Stanley Black & Decker To Shutter New Britain Manufacturing Facility

Published

on

Stanley Black & Decker To Shutter New Britain Manufacturing Facility


NEW BRITAIN, CT — Stanley Black & Decker on Thursday said it has decided to close its manufacturing facility in New Britain.

Debora Raymond, vice president of external communications for the manufacturer, said the decision is a result of a “structural decline in demand for single-sided tape measures.”

The New Britain facility predominantly makes these products, according to Raymond.

“These products are quickly becoming obsolete in the markets we serve,” Raymond said, via an emailed statement Thursday.

Advertisement

The decision is expected to impact approximately 300 employees, according to Raymond.

“We are focused on supporting impacted employees through this transition, including providing options for employment at other facilities, severance, and job placement support services for both salaried and hourly employees,” Raymond said.

As of Thursday at 4:30 p.m., no Worker Adjustment and Retraining Notification (WARN) Act notice had been filed with the state Department of Labor.

The company’s corporate headquarters remains at 1000 Stanley Dr., New Britain.

Gov. Ned Lamont released the following statement on the decision:

Advertisement

“Although Stanley has made the decision to discontinue operations for manufacturing outdated products, a change in workforce opportunities is difficult for employees, their families, and any community.,” Lamont said. “However, I am hopeful that these skilled workers will be repurposed with the help of Stanley Black & Decker, a company that will still proudly be headquartered here in Connecticut. My administration is working closely with local and state leaders to support affected workers and to reimagine the factory site so it can continue to create opportunity and strengthen New Britain’s economic future.”

New Britain Mayor Bobby Sanchez said he is “deeply disappointed” the company will be closing its Myrtle Street operations.

“For generations, Stanley Works has been part of the fabric of our city, providing good-paying jobs, supporting families, and helping build New Britain’s proud reputation as the ‘Hardware City,’” Sanchez said.

According to the mayor, his office’s immediate focus is on helping affected workers and their families. The mayor has been in contact with Lamont’s office, and they will be working closely to make sure employees have access to job placement services, retraining opportunities and support, Sanchez said.

“We will continue aggressively pursuing economic development opportunities and attracting businesses that are looking for a true community partner, a city ready to collaborate, innovate and grow alongside them,” Sanchez said. “New Britain has reinvented itself before, and we will do so again.”

Advertisement

Stanley Black & Decker, founded in 1843, operates manufacturing facilities worldwide, according to its website. It reports having 43,500 employees globally, and makes an array of products, such as power tools and equipment, hand tools, and fasteners.





Source link

Connecticut

State trooper who was arrested twice has resigned

Published

on

State trooper who was arrested twice has resigned


A state trooper who was arrested in August and November of 2025 for the same domestic disturbance resigned on March 5, Connecticut State Police confirmed on Tuesday.

On Aug. 27, 37-year-old Trooper Edward Gookin was arrested after a verbal and physical altercation at a home in Griswold, and he was determined to be the aggressor.

He was charged with disorderly conduct, released on $2,500 bond, and placed on paid administrative duty at that time.

Then on Nov. 19, Gookin was arrested again for the same incident that happened on Aug. 27.

Advertisement

This time, he was charged with risk of injury to a child, reckless endangerment, and illegal discharge of a firearm. He was again placed on paid administrative duty, posted a $25,000 bond, and appeared in court.

Now, state police say Gookin has resigned.



Source link

Advertisement
Continue Reading

Connecticut

New push for Long Island–Connecticut bridge revives decades-old debate

Published

on

New push for Long Island–Connecticut bridge revives decades-old debate


A proposal to build a bridge linking Long Island to Connecticut is once again sparking conversation—and controversy—nearly a century after the idea first surfaced.

The latest plan, introduced by Connecticut developer Steve Shapiro, calls for a 14-mile span stretching across Long Island Sound from Bridgeport, Connecticut, to the Sunken Meadow Parkway on Long Island’s North Shore. If completed, the project would mark the first direct roadway connection between Long Island and New England.

Supporters say the bridge could transform regional travel, easing congestion and offering an alternative route for drivers who currently must pass through New York City to reach the mainland.

“We have such an opportunity in Connecticut and on Long Island to connect our two regions,” Shapiro said in a promotional video.

Advertisement

The proposed crossing would cost an estimated $50 billion to construct, with tolls projected at roughly $39 each way. Plans could also include a rail component to accommodate both passenger and freight service.

The idea of a cross-sound bridge is not new. Discussions date back to the 1930s, but repeated proposals over the decades have failed to gain enough political or public support to move forward.

At Sunken Meadow State Park, where the bridge could make landfall, residents and visitors expressed mixed reactions.

“I think it’s helpful with traffic—alleviating congestion trying to get to the city,” said Gus Hueber of East Northport.

Others worry about the environmental and cultural impact on Long Island’s character.

Advertisement

“It would destroy this area,” said Maureen Abbatecola of Kings Park. “It might make it easier for people to get on and off Long Island, but it’s also very special that this is an island—and that might take some of that away.”

Shapiro has suggested a potential compromise to address environmental concerns, including a hybrid design that would tunnel a portion of the route beneath the shoreline near the park.

“You could tunnel it under about a mile or two offshore and then go under the park,” he said.

In Connecticut, a bill that would authorize a feasibility study for the bridge was introduced in the state assembly but has not yet advanced out of committee. Despite that, Shapiro remains optimistic, emphasizing that cooperation between New York, Connecticut, and the federal government would be key to making the project a reality.

For now, the proposal remains in its early stages—but as it has for generations, the idea of bridging Long Island Sound continues to divide opinion on both sides of the water.

Advertisement



Source link

Continue Reading

Connecticut

AGANORSA Leaf Aniversario Connecticut Getting New Toro Tubo

Published

on

AGANORSA Leaf Aniversario Connecticut Getting New Toro Tubo


There’s already an AGANORSA Leaf Aniversario Connecticut Toro; it measures 6 1/4 x 52. In a month, there will also be a 6 x 52 toro.

It’s not simply a quarter-inch of difference in length. The new Tubo is a round cigar while the original Toro is box-pressed. Also, as the name implies, the Tubo will come individually packaged in tubes. Blend-wise, the two cigars are the same: an Ecuadorian Connecticut-seed wrapper over Nicaraguan tobaccos grown by AGANORSA. The line is made at the company’s factory in Nicaragua.

The AGANORSA Leaf Aniversario Connecticut Tubo has an MSRP of $19.99 and comes in boxes of 10 cigars.

Advertisement

“The Aniversario Connecticut Tubo offers a perfect combination of elegance, convenience, and flavor,” said Terence Reilly, vp of sales & marketing for AGANORSA Leaf, in a press release. “It’s an ideal cigar for both longtime fans of the brand and smokers discovering Aganorsa for the first time.”

AGANORSA Leaf will show off the Aniversario Connecticut Tubo to retailers during the 2026 PCA Convention & Trade Show, which takes place April 18-20 in New Orleans. The company says it will ship the cigar to stores in late April.

Avatar photo

Charlie Minato

I am an editor and co-founder of halfwheel.com/Rueda Media, LLC. Previously, I started TheCigarFeed, one of the two predecessors blogs of halfwheel. I have written about the cigar industry since 2010, covering everything from product launches to regulation to M&A. Beyond writing, I handle a lot of the behind-the-scenes stuff from weighing cigars to coordinating the tech. Outside of work, I enjoy playing tennis, watching boxing, falling asleep to the Le Mans 24, wearing sweatshirts year-round and eating gyros. echte liebe.

Advertisement



Source link

Continue Reading
Advertisement

Trending