Connect with us

Austin, TX

Army G-9, Team Bliss open DOD's first 3D-printed barracks

Published

on

Army G-9, Team Bliss open DOD's first 3D-printed barracks






Two of three newly opened 3D-printed barracks at Fort Bliss, Texas, Jan. 29, 2025. Lt. Gen. David Wilson, deputy Army chief of staff, G-9 (Installations), and Sgt. Maj. Michael Perry, his senior enlisted adviser, joined 1st Armored Division and Fort Bliss Garrison leaders for the official ribbon-cutting ceremony. They are the first 3D-printed structures to comply with the Defense Department’s updated Unified Facilities Criteria, a mandate updated annually that provides construction guidance DOD-wide and now reflects standards for additive manufacturing, or 3D-printed, facilities.
(Photo Credit: U.S. Army photo by David Poe)

VIEW ORIGINAL

FORT BLISS, Texas — The “Home of America’s Tank Division” now houses the Defense Department’s first 3D-printed barracks.

Lt. Gen. David Wilson, deputy Army chief of staff, G-9 (Installations), and Sgt. Maj. Michael Perry, his senior enlisted adviser, joined 1st Armored Division and Fort Bliss Garrison leaders for the official ribbon-cutting ceremony on Jan. 29, 2025.

Advertisement

The facilities on West Bliss are one of two new sites at Fort Bliss featuring this innovative military infrastructure. They are the first 3D-printed structures to comply with the Defense Department’s updated Unified Facilities Criteria, a mandate updated annually that provides construction guidance DOD-wide and now reflects standards for additive manufacturing, or 3D-printed, facilities.

According to ICON, an Austin, Texas, company that spearheaded the project, the buildings each encompass 5,700 square feet. When construction began in 2024, these barracks were the largest planned 3D-printed structures in the Western Hemisphere.


Army G-8, Team Bliss Open DOD’s First 3-D Printed Barracks








1 / 2

Show Caption +
Hide Caption –



An example of the facilities in one of the new 3D-printed barracks at Fort Bliss, Texas, Jan. 29, 2025. According to ICON, an Austin, Texas, company that spearheaded the project, the buildings each encompass 5,700 square feet. When construction began in 2024, these barracks were the largest planned 3D-printed structures in the Western Hemisphere.
(Photo Credit: David Poe)

VIEW ORIGINAL


Army G-8, Team Bliss Open DOD’s First 3-D Printed Barracks








2 / 2

Show Caption +
Hide Caption –



An example of the facilities in one of the new 3D-printed barracks at Fort Bliss, Texas, Jan. 29, 2025. According to ICON, an Austin, Texas, company that spearheaded the project, the buildings each encompass 5,700 square feet. When construction began in 2024, these barracks were the largest planned 3D-printed structures in the Western Hemisphere.
(Photo Credit: U.S. Army photo by David Poe)

VIEW ORIGINAL

Advertisement

In total, three buildings were opened at Fort Bliss: two in the Pershing Heights area and one at Camp McGregor on the Fort Bliss Training Complex in New Mexico.

The project was completed with assistance from the Fort Bliss Garrison Directorate of Public Works and the U.S. Army Corps of Engineers, who were essential in ensuring the safety certifications of these privately built structures.

The newly opened facilities will initially house troops deploying to Fort Bliss in support of the installation’s Mobilization Force Generation Installation mission. Fort Bliss processes and trains approximately 70,000 service members annually, with support from Army Reserve and National Guard units that deploy to Fort Bliss for annual rotations.

The new barracks at Fort Bliss can house up to 56 Soldiers per building. The Pershing Heights facilities will be first used by the 382nd Military Police Detachment, an Army Reserve unit from Massachusetts, which will be heading to Fort Bliss in support of the MFGI mission.


Advertisement

Army G-8, Team Bliss Open DOD’s First 3-D Printed Barracks




Army leaders, stakeholders and guests tour one of three new 3D-printed barracks at Fort Bliss, Texas, Jan. 29, 2025. According to ICON, an Austin, Texas, company that spearheaded the project, the buildings each encompass 5,700 square feet. When construction began in 2024, these barracks were the largest planned 3D-printed structures in the Western Hemisphere.
(Photo Credit: U.S. Army photo by David Poe)

VIEW ORIGINAL

The 3D-printing, or additive manufacturing, process begins with designing the facility using computer-aided design (CAD) software. The barracks design was then virtually sliced into horizontal layers and vertically rejoined.

The barracks were built with ICON’s Vulcan printer, a five-ton, gantry-style 3D printer that stands almost 16 feet tall and 47 feet wide. The machine uses a proprietary concrete-based material called Lavacrete, which can be tailored to local environmental conditions, including humidity and temperature, ensuring optimal performance and aesthetic appeal.

Wilson served with the 1st Armored Division at Fort Bliss from 2008 to 2010 as the 121st Brigade Support Battalion commander shortly after the division moved its headquarters from Ansbach, Germany, to El Paso, Texas.

He recalled the borderland as “one of the warmest and most welcoming communities I had ever been a part of in my 38 years of service, both as an enlisted Soldier and a commissioned officer.”

Advertisement

Army G-8, Team Bliss Open DOD’s First 3-D Printed Barracks








1 / 3

Show Caption +
Hide Caption –



(From right) Col. Brendan Gallagher, Fort Bliss garrison commander; U.S. Rep. Veronica Escobar; Lt. Gen. David Wilson, deputy Army chief of staff, G-9 (Installations); and Maj. Gen. Curtis Taylor, 1st Armored Division and Fort Bliss commanding general, formally open the Defense Department’s first 3D-printed barracks at Fort Bliss, Texas, Jan. 29, 2025. The facilities will initially house troops deploying to Fort Bliss in support of the installation’s Mobilization Force Generation Installation mission. Fort Bliss processes and trains approximately 70,000 service members annually, with support from Army Reserve and National Guard units that deploy to Fort Bliss for annual rotations. The new barracks at Fort Bliss can house up to 56 soldiers per building. The Pershing Heights facilities will be first used by the 382nd Military Police Detachment, an Army Reserve unit from Massachusetts, which will be heading to Fort Bliss in support of the MFGI mission.
(Photo Credit: U.S. Army photo by David Poe)

VIEW ORIGINAL


Army G-8, Team Bliss Open DOD’s First 3-D Printed Barracks








2 / 3

Show Caption +
Hide Caption –



Lt. Gen. David Wilson, deputy Army chief of staff, G-9 (Installations), speaks at the opening of the Defense Department’s first 3D-printed barracks at Fort Bliss, Texas, Jan. 29, 2025. “Fort Bliss is not only a military installation; it’s a cornerstone of our nation’s defense and a symbol of resilience, strength, and enduring commitment to our nation—a place of growth and transformation,” Wilson said. “This post has evolved with the times, embracing new technologies, new strategies, and new ways of serving our country. So, it’s fitting that we gather here today to open new barracks that embody the same spirit of evolution and progress.”
(Photo Credit: David Poe)

VIEW ORIGINAL


Army G-8, Team Bliss Open DOD’s First 3-D Printed Barracks








3 / 3

Show Caption +
Hide Caption –



Col. Brendan Gallagher, Fort Bliss garrison commander, speaks at the opening of the Defense Department’s first 3D-printed barracks at Fort Bliss, Texas, Jan. 29, 2025. “This is not just another barrack – this is the largest 3D-printed barracks ever and it is among the largest 3D-printed structures ever in the world,” Gallagher said. “It clearly and visibly shows that Fort Bliss is continuing to lead the way in innovation for our Army. We believe this represents the cutting edge of innovation and reflects technology that will shape the future for Fort Bliss and hopefully many other installations.”
(Photo Credit: U.S. Army photo by David Poe)

VIEW ORIGINAL

The Army G-9 oversees Army housing, military construction and infrastructure investment, child care, energy and water security, resilience and sustainability, installation environmental management and stewardship, and other installation-related concerns.

Advertisement

“The great senator Robert Francis Kennedy once said, ‘Do not look at things and wonder why, dream new ideas and say ‘why not?’” Wilson said. “We’re here today because many people dreamed of new ideas and said ‘why not,’ and that’s why we’re delivering this state-of-the-art facility to the Army today.

“Fort Bliss is not only a military installation; it’s a cornerstone of our nation’s defense and a symbol of resilience, strength, and enduring commitment to our nation—a place of growth and transformation. This post has evolved with the times, embracing new technologies, new strategies, and new ways of serving our country,” he said. “So, it’s fitting that we gather here today to open new barracks that embody the same spirit of evolution and progress.”



Source link

Advertisement

Austin, TX

A total lunar eclipse will turn the moon blood red on Tuesday

Published

on

A total lunar eclipse will turn the moon blood red on Tuesday


A blood-red moon will soon grace the skies for a total lunar eclipse — and there won’t be another until late 2028.

The spectacle will be visible Tuesday morning from North America, Central America and the western part of South America. Australia and eastern Asia can catch it Tuesday night. Partial stages of the eclipse with small bites taken out of the moon can be seen from Central Asia and much of South America. Africa and Europe will be shut out.

Solar and lunar eclipses happen due to a precise alignment of the sun, moon and Earth. There are between four and seven a year, according to NASA.

The eclipses tend to follow each other, taking advantage of the sweet spot in the celestial bodies’ orbits. Tuesday’s total eclipse of the moon comes two weeks after a ‘ring of fire’ solar eclipse that dazzled people and penguins in Antarctica.

Advertisement

During a total lunar eclipse, the Earth is between the sun and full moon, casting a shadow that covers the moon. The so-called blood moon looks red because of stray bits of sunlight filtering through Earth’s atmosphere.

The show unfolds over several hours, with totality lasting about an hour.

Compared to a solar eclipse, “the lunar eclipse is a little more of a relaxed pace,” said Catherine Miller at Middlebury College’s Mittelman Observatory.

For those in the path, there’s no need for any special equipment to observe — just a clear, cloudless view of the sky.

Use a forecasting app or any online celestial calendar to look up the exact timing for your area. Venture outside a few times to see Earth’s shadow darken the moon, eventually revealing the reddish-orange orb.

Advertisement

“You don’t have to be out there the whole time to see the shadows moving,” said astronomer Bennett Maruca with the University of Delaware.

There’s a partial lunar eclipse on the docket for August, visible across the Americas, Europe, Africa and west Asia.

While most people are looking forward to seeing the eclipse, throughout history — many people saw eclipses as omens of doom. Some superstitions and fears still exist. NBC 5 producer Sara Sanchez learned more from historians and eclipse experts.



Source link

Advertisement
Continue Reading

Austin, TX

Austin Animal Services Hosts Free Spay/Neuter Clinic

Published

on

Austin Animal Services Hosts Free Spay/Neuter Clinic


Austin Animal Services is hosting a free, high-quality, high-volume spay/neuter for cats and dogs now through March 2 in North Austin.

The five-day clinic, which is being held in partnership with Greater Good Charities, is taking place at 11580 Stonehollow Dr., Suite 160. Registration and drop-off begin on-site each day from 7:30-10 a.m. or until capacity is reached.

In addition to free spay/neuter surgeries, pets receiving surgery will also receive vaccinations, flea and tick prevention, and microchips, ensuring that they return home healthier and better protected.

Spaying and neutering is the most effective tool in preventing unplanned litters and reducing the number of stray and surrendered animals entering local shelters. Managing overpopulation helps individual owners and also strengthens community health by reducing roaming animals, easing shelter overcrowding, and decreasing long-term strain on animal welfare resources.

Advertisement

This is the seventh free clinic the city has hosted since 2024. The previous six clinics provided spay/neuter services to more than 6,000 pets. The upcoming clinic is expected to complete approximately 1,200 surgeries in just five days. It is a significant investment in prevention that helps reduce future shelter intake and supports responsible pet ownership across Austin.

High-volume, high-quality spay/neuter clinics offered at no cost are rare, and many pet owners face procedure costs ranging from $75 to several hundred dollars, along with wait times that can stretch for weeks or months. This clinic removes those barriers by providing same-day services at no charge.

“This clinic is about prevention,” said Austin Animal Services Director Monica Dangler. “When we provide accessible spay and neuter services, we’re helping families care for their pets while also reducing strain on shelters like ours and improving safety across our community.”





Source link

Advertisement
Continue Reading

Austin, TX

Why is Austin so warm in February?

Published

on

Why is Austin so warm in February?


February is typically one of our cooler months in Austin, Texas.

In 2021, a series of ice storms and snow storms caused mass chaos and is a winter storm that Austinites will never forget. Now, instead of worrying about scraping ice off of our cars, we’re grabbing the swimsuits.

Austin is in the midst of one of the warmest February’s in the city’s history. This year’s January cold snap lingered around for Feb. 1, but since then, only two days have been slightly below average. Compare that with 20 days above average, with the rest of this month expected to have temps in the mid to upper 80s.

But how does this compare to our warmest February ever? We don’t have to go back too far to find the hottest February on record in 2017. The average high temp was 76.5 degrees with 12 out of the 28 days spent above 80 degrees.

Advertisement

Other years in the top 5 were 1999, 1976, and 1957 with each year having numerous days above 80 degrees. So far, 2026 has ten. Plus, I’m forecasting 2 more 80 degree days. Should we hold onto this weather pattern, this will be in the top five hottest February’s of all-time.

Austin is in the midst of one of the warmest February’s in the city’s history. (Graphic: Michael Crowley)

For some, this heat may be just another day to grab the swimsuit or head outside and work up a sweat, but this has meteorologists sweating for different reasons. We are in a serious drought now.

The latest drought monitor released on Feb. 26, 2026 has 9 of the 13 counties in the CBS Austin viewing area in an “extreme drought,” which is the second worst category of drought conditions.

The latest drought monitor released on Feb. 26, 2026 has 9 of the 13 counties in the CBS Austin viewing area in an

The latest drought monitor released on Feb. 26, 2026 has 9 of the 13 counties in the CBS Austin viewing area in an “extreme drought,” which is the second worst category of drought conditions. (Graphic: Michael Crowley)

Advertisement

In the past 190 days, two of those days have had rainfall over 1 inch. Our current streak of 123 days in a row with less than 1 inch in rainfall is one of the longest since 2000.

Combine the heat and the rainless days, and you get a flash drought. Opposite of a flash flood, hot temperatures rapidly dry out the soil and drought conditions can worsen quickly. With the dehydrated vegetation, dry air, and above average temperatures, you’re now looking at dangerous fire weather.

We’ve already had several fires reported across Central Texas in just the past week. The Nebo Mountain Fire in Gillespie County and the Cedar Gulch Fire in Burnet County. With this above average heat and below average precipitation, we are especially vulnerable.

But there is some good news.

The start of March looks to be starting off very warm, but our pattern looks to become a bit more active. Our long-term futurecasts look to be favoring more showers and storms possible for the first few weeks of March.

Advertisement

Remember that we are also getting closer to our severe weather season. So while we do need the rain, we must remain safe in case we get locally high rainfall amounts in these thunderstorms and be mindful of tornadoes and damaging winds.

Hopefully we can see an improvement in this drought and heat, but history is made in different ways every year nowadays. Maybe it’ll be for the right reasons this time around.



Source link

Continue Reading

Trending