Technology
How crooks use skimmers, shimmers to steal your money at ATM
Have you ever had your debit card or credit card information stolen from an ATM? If you have, you may have fallen victim to a skimmer. Tiny devices used by fraudsters called “skimmers” can be attached to ATMs and used to steal data off of your debit or credit card magnetic strip.
There’s also an even smaller device called a “shimmer” that can be installed by fraudsters into an ATM that steals data from your credit or debit card chip if you have a newer chip-based card. If you’re worried about falling victim to skimmers and shimmers, your first line of defense is to understand what these things are and how to keep yourself safe.
CLICK TO GET KURT’S FREE CYBERGUY NEWSLETTER WITH SECURITY ALERTS, QUICK VIDEO TIPS, TECH REVIEWS AND EASY HOW-TO’S TO MAKE YOU SMARTER
Two examples of skimmers (Dubuque Police Department) (Kurt “CyberGuy” Knutsson)
How does a ‘skimmer’ work?
Skimmers are fake card readers that can be installed on top of legitimate card readers and steal data from every person who uses the card reader. These can be found on ATMs, gas pumps and nearly any other card reader device out in the public. Breaking into an ATM is no easy feat, so thieves typically put skimmers on top of the already-existing card reader.
Even more disturbing, though, is that these thieves will also place a hidden camera somewhere near the keypad of the card reader so that they can capture PINs. Some criminals even place false number pads to capture PIN codes, eliminating the need for a hidden camera.
MORE: TIPS TO FOLLOW FROM ONE INCREDIBLY COSTLY CONVERSATION WITH CYBERCROOKS
Example of hidden camera, skimmer and keypad overlay (FBI) (Kurt “CyberGuy” Knutsson)
How to spot a skimmer
Luckily, there are a few tell-tale signs to see if an ATM you are using has been corrupted by thieves with a skimmer. The first step to spotting a skimmer is to pay close attention to the color of the card slot. Typically, on most ATMs, the card slot and ATM will be the same color. If you notice that there’s a bulky, differently-colored card reader, there’s a pretty good chance it’s a skimmer. Skimmers are also installed over the original card reader, so you might notice some dried glue or adhesive around the card reader. Never use a card reader, whether at a gas pump or an ATM, if you suspect a skimmer device has been installed over the original card reader.
MORE: HOW TO FIGHT BACK AGAINST DEBIT CARD HACKERS WHO ARE AFTER YOUR MONEY
Beyond skimmers, beware of the rise in shimming
Skimming is less prevalent than it used to be, but you still should always inspect the card reader and keypad of an ATM before using it, in case a crook has installed a skimmer on it. This is especially pertinent if you are traveling abroad, where skimmers are frequently used by thieves in major tourist areas. However, as skimmers have declined, a new way to steal card data has become popular, called “shimming.”
Example of shimmer (Royal Canadian Mounted Police) (Kurt “CyberGuy” Knutsson)
MORE: GOT A CREDIT CARD FRAUD ALERT? HOW CROOKS SWIPE YOUR PAYMENT CARD DETAILS
What are shimmers?
Skimmers typically don’t work on chip-based credit and debit cards, called EMV cards, which offer a more robust set of security features, such as double encryption between the chip and the magnetic stripe on the back of your card. As you might expect, however, thieves adapt quickly and have developed a system called “shimmers,” which can be used to steal the data from your chip-protected card.
Shimmers are paper-thin devices with a microchip installed on them that are inserted by thieves into ATMs. You can’t see a shimmer from the outside like you can a skimmer, and once you insert your card into the affected ATM, the shimmer steals your card data off the chip, the same way a skimmer would steal your data from the magnetic stripe.
Example of shimmer (Royal Canadian Mounted Police) (Kurt “CyberGuy” Knutsson)
GET MORE OF MY SECURITY ALERTS, QUICK TIPS & EASY VIDEO TUTORIALS WITH THE FREE CYBERGUY NEWSLETTER – CLICK HERE
How to keep yourself safe from shimmers
Shimmers, as we just discussed, are impossible to see from the outside of an ATM or other pay terminal, but there are still a few easy ways you can keep yourself from crooks using shimmers.
Tip #1 – Avoid non-bank ATMs
ATMs that are found in bars, convenience stores and other public places fall victim to card skimmers and shimmers more frequently due to their lack of security features when compared with bank ATMs. Bank ATMs are always the safest to use.
Tip #2 – Utilize contactless payments
An easy way to keep yourself safe when using pay terminals is to use contactless payment systems, such as Apple Pay, Google Pay, Venmo and PayPal, with your phone instead of inserting your card.
Apple Pay (Apple) (Kurt “CyberGuy” Knutsson)
MORE: BEST IDENTITY THEFT PROTECTION SERVICES 2024
Tip #3 – Activate bank alerts on your cards
You can activate mobile alerts on your cards through your bank’s mobile app, which will alert you to any charges being made. This can help keep you safe by quickly identifying any fraudulent charges that need to be canceled.
Bank alert (Bank of America) (Kurt “CyberGuy” Knutsson)
MORE: HOW TO EASILY ADD YOUR CREDIT CARDS AND LOYALTY PASSES TO YOUR IPHONE
Kurt’s key takeaways
Even if you do everything right and go over every inch of an ATM, you, unfortunately, can still fall victim to a shimmer. Always remember, if you suspect you’ve been a victim or credit or debit card shimming and skimming, report any fraudulent transactions to your bank immediately. You won’t be held liable, and your money will be returned to your account. Try to avoid using non-bank public ATMs as much as possible, and when possible, opt to use a contactless payment method instead of inserting your card reader into a terminal.
What additional security measures do you think could be implemented to protect consumers from skimmers and shimmers? Let us know by writing us at Cyberguy.com/Contact.
For more of my tech tips & security alerts, subscribe to my free CyberGuy Report Newsletter by heading to Cyberguy.com/Newsletter.
Ask Kurt a question or let us know what stories you’d like us to cover.
Answers to the most asked CyberGuy questions:
Copyright 2024 CyberGuy.com. All rights reserved.
Technology
This pasta sauce wants to record your family
As if there weren’t already enough devices listening in on everything being said in your home, Prego, the pasta and pizza sauce brand, is releasing a device designed to record everything said around the dinner table for posterity. The Connection Keeper, which looks like an oversized pasta jar lid, was created in collaboration with StoryCorps, the nonprofit organization focused on preserving the stories of Americans in a collection housed at the Library of Congress’ American Folklife Center. There’s no AI, Wi-Fi, or Bluetooth, but you can optionally upload recordings to StoryCorps’ website to make them easier to share with family.
Prego says the goal of the device is to encourage families to make memories through conversation during dinner instead of staring at their phones — but only for a small number of families. The company is only planning to make less than 100 of them. The Connection Keeper will be available for purchase online starting on April 27th for $20 as part of a bundle that includes the device, a jar of Prego sauce, spaghetti noodles, and a deck of cards featuring conversation prompts and ideas.
Using the device is as easy as plopping the Connection Keeper down in the middle of everyone at the table and pressing one button to start recording. Using a pair of microphones, it captures CD-quality audio to a 16GB microSD card for up to eight hours when fully charged.
When dinner’s over, the recordings can be transferred to a computer over USB-C and then uploaded to a dedicated microsite created by StoryCorps where they’re preserved and accessible only by the uploader, unless they choose to share them with other StoryCorps users or the general public. You even have the option to archive them within the Library of Congress, which makes them public automatically, so hopefully your family talks about more than just stealing brainrots.
The recordings can be accessed on a smartphone through the StoryCorps app, but Prego intentionally left phones out of the rest of the process to discourage their use at the table. It’s also why the Connection Keeper lacks a screen. The goal was to minimize interactions with the device so family members instead focused on talking with each other.
Technology
BMW puts humanoid robots to work building EVs
NEWYou can now listen to Fox News articles!
BMW Group has spent years testing automation, but this latest move feels different. Instead of robotic arms locked in cages, the company is now using humanoid robots that move through factories more like people. After a successful pilot in Spartanburg, South Carolina, BMW is bringing that same idea into its Leipzig, Germany, factory, where it is testing robots in real production environments. This time, it is partnering with Hexagon Robotics to introduce a new generation of AI-powered machines. Unlike many robot demos you see online, this one is already being tested inside a real production environment.
Sign up for my FREE CyberGuy Report
- Get my best tech tips, urgent security alerts and exclusive deals delivered straight to your inbox.
- For simple, real-world ways to spot scams early and stay protected, visit CyberGuy.com – trusted by millions who watch CyberGuy on TV daily.
Plus, you’ll get instant access to my Ultimate Scam Survival Guide free when you join.
CHINESE ROBOT BREAKS HUMAN WORLD RECORD IN BEIJING HALF-MARATHON
BMW’s new AI-driven robots are now operating inside active factories, marking a shift from traditional automation to flexible, human-like systems. (Christof Rührmair/picture alliance via Getty Images)
How BMW’s humanoid robot pilot built over 30,000 vehicles
BMW’s earlier pilot used Figure 02 humanoid robots for a very specific task. They handled the precise positioning of sheet metal for welding on the BMW X3 production line. That task may seem small, but it plays a key role in keeping production moving smoothly. Precision work like this can easily slow things down or create bottlenecks. According to BMW, those robots helped contribute to building more than 30,000 vehicles. Because of that success, the company now feels confident about expanding the concept. Instead of limiting testing to one plant, BMW is moving forward with its iFACTORY initiative in Leipzig, where EV production is already a major focus.
BMW’s new AI humanoid robots for EV factories
The new robots, called AEON, come from Hexagon Robotics. They are designed to work inside active factory environments without constant human direction. They rely on AI-based motion control, which helps them move through complex spaces. At the same time, built-in sensors allow them to understand their surroundings in real time. Because of that, they can adjust their actions on the fly instead of following fixed instructions. Hexagon refers to this as “Physical AI.” In simple terms, the robot can make decisions based on what it sees around it. As a result, the robot does not stop when something unexpected happens. Instead, it adapts and keeps working. That marks a clear shift from traditional factory automation.
Why BMW is investing in humanoid robots now
BMW executives have made it clear that this is not about replacing people overnight. Instead, the goal is to test what actually works in real production environments. Michael Nikolaides, who oversees BMW’s production network, says these pilot programs help the company refine how AI-powered robots learn on the job. He goes on to point to a broader vision, saying: “Digitalization improves the competitiveness of our production, here in Europe and worldwide. The symbiosis of engineering expertise and artificial intelligence opens up entirely new possibilities in production.” There is also a practical reason for the humanoid design. Factories are already built for human workers. Because of that, a robot that can use the same spaces and tools is much easier to integrate than one that requires a complete redesign.
HUMANOID ROBOTS HIT MASS PRODUCTION IN CHINA
After a successful U.S. pilot, BMW is deploying humanoid robots in Leipzig to improve efficiency and adaptability in electric vehicle manufacturing. (Christof Rührmair/picture alliance via Getty Images)
How humanoid robots could transform factory work
For years, humanoid robots felt more like something you saw in those social media demo videos than something you would trust on a real factory floor. Yes, they looked impressive, but they struggled in real environments. That is starting to change. Factories are still unpredictable. Parts do not always arrive in the exact same position. Workers move around constantly, and tools and materials shift throughout the day. Because of this, traditional robots often struggle since they rely on tightly controlled conditions. AI-powered humanoid robots can handle that kind of variability. They move around people and equipment without stopping. They adjust when parts are slightly off, and they work in spaces built for human workers. That level of flexibility is what sets this new wave of AI-powered robotics apart from earlier forms of automation.
What this means to you
Even if you never step inside a factory, this shift still matters. For one, it could change how cars are built, whether they are electric or gas. When production speeds up, costs can come down over time, which could affect what you pay for your next vehicle. At the same time, factory jobs are likely to change. Some repetitive or physically demanding work may move to robots. In many cases, that means people shift into roles focused on oversight, maintenance or more skilled tasks. Step back for a second, and you can see this is a sign of where AI is headed next. It is no longer limited to apps on your phone or software on your computer. Now, it is starting to show up in the physical world in ways you can actually see and interact with.
Take my quiz: How safe is your online security?
Think your devices and data are truly protected? Take this quick quiz to see where your digital habits stand. From passwords to Wi-Fi settings, you’ll get a personalized breakdown of what you’re doing right and what needs improvement. Take my Quiz here: Cyberguy.com
HOME ROBOT COOKS, CLEANS AND ORGANIZES YOUR LIFE
BMW is expanding its humanoid robot program into a German EV factory, testing AI-powered machines designed to work alongside humans in real production environments. (Christof Rührmair/picture alliance via Getty Images)
Kurt’s key takeaways
BMW is not the only company testing humanoid robots, but it is one of the first to bring them into real production environments. That is a big shift from the testing phase most of us are used to seeing. The fact that these robots are already helping build tens of thousands of vehicles shows that this is moving beyond early trials. It is starting to become part of how factories actually run. Where this goes next is still an open question. If the technology keeps improving, you could see more of these robots show up in factories and warehouses over time.
So here is the bigger question. How do you feel about humanoid robots working alongside people in factories? Would you trust them to help build the car you drive? Let us know by writing to us at Cyberguy.com
CLICK HERE TO DOWNLOAD THE FOX NEWS APP
Sign up for my FREE CyberGuy Report
- Get my best tech tips, urgent security alerts and exclusive deals delivered straight to your inbox.
- For simple, real-world ways to spot scams early and stay protected, visit CyberGuy.com – trusted by millions who watch CyberGuy on TV daily.
- Plus, you’ll get instant access to my Ultimate Scam Survival Guide free when you join.
Copyright 2026 CyberGuy.com. All rights reserved.
Technology
Blue Origin successfully reused its New Glenn rocket
Today’s launch of AST SpaceMobile’s BlueBird 7 satellite aboard Blue Origin’s reusable New Glenn rocket was a partial success. The New Glenn touched down on its landing pad without incident, making it the second launch and landing for the first stage booster, and officially giving Jeff Bezos a reusable launch vehicle. Unfortunately for AST SpaceMobile, the mission was less successful. Its cell-tower-in-space was delivered to a lower orbit than expected by the second stage of the launch vehicle, rendering it functionally useless.
While the satellite separated from the launch vehicle and powered on, the altitude is too low to sustain operations with its on-board thruster technology and will de-orbited.
Bezos, for his part, posted a video of the landing on X without comment.
-
New York1 hour agoGotti Grandson Is Sentenced to 15 Months for Covid Relief Fraud
-
Detroit, MI2 hours agoWhy a Detroit family’s $300 brick repair job turned into a fraud investigation
-
San Francisco, CA2 hours agoSea lion pup found in San Francisco’s Outer Sunset malnourished but ‘feisty’
-
Dallas, TX2 hours agoDallas Cowboys 2026 NFL Draft debate heats up
-
Miami, FL2 hours agoMan arrested in Miami for alleged sexual battery on 10-year-old girl – WSVN 7News | Miami News, Weather, Sports | Fort Lauderdale
-
Boston, MA2 hours agoFormer BYU star Clayton Young crushes lifetime best in Boston — on short notice
-
Denver, CO2 hours agoColorado boasts two of the best coffee shops in the Americas, according to new ranking
-
Seattle, WA2 hours agoDelta flight from Seoul to Atlanta diverted to Seattle after report of suspicious package