Connect with us

Milwaukee, WI

Sturgeon migrating up Milwaukee River, sensor system shows

Published

on


In one other step ahead for fisheries administration on the Milwaukee River, final week a sensor array detected 5 lake sturgeon transferring upriver.

The “hits” had been the primary on sturgeon because the high-tech system was put in throughout the river backside in July 2021, in accordance with the Division of Pure Sources.

“It is undoubtedly thrilling,” stated Aaron Schiller, DNR fisheries biologist who helped set up and screens the array. “This confirms (the sensor) is engaged on sturgeon and it is doing what it is designed to do.”

The array is a everlasting, cross-stream system to detect fish implanted with passive built-in transponders (PIT) tags. It is put in 4 miles north of the river mouth and upstream of the outdated North Avenue dam website.

Advertisement

The PIT tags are the dimensions of a grain of rice and work very equally to the “chips” put into canine and cats.

Extra:Smith: ‘Smeltmania’ is prior to now, however Lake Michigan smelters nonetheless can get a thrill on spring nights

Extra:Smith: Wolf trackers present crucial on-the-ground information for Wisconsin wildlife managers

Extra:Outdoor calendar

A young lake sturgeon is prepared for tagging in 2014 at Riveredge Nature Center in Newburg. The fish was be implanted with a PIT  tag that would allow it to be identified by a high-tech sensor system.

The expertise carries a singular 15-digit quantity and hyperlinks to information on tagging date, location, species and size and weight of the fish when dealt with.

One PIT tag has been injected into every of the roughly 19,000 younger sturgeon raised on the Riveredge Nature Middle and launched into the Milwaukee River or harbor since 2006 as a part of the restoration venture referred to as Return the Sturgeon.

Advertisement

The DNR has additionally implanted the tags in an assortment of different species of fish within the Milwaukee, together with northern pike, brown trout, brook trout, steelhead (rainbow trout), redhorse, suckers and walleye.

As a result of its a number of sensors spaced throughout the river backside, the system can even decide if a fish is transferring upstream or down.

Though sturgeon, together with a PIT-tagged fish, had been noticed within the Milwaukee River final spring, the sensor system had not but been put in and fisheries crews and sturgeon advocates have been intently watching this 12 months for indicators of a possible spawning migration.

The distant design is preferable as a result of it’s miles extra environment friendly for scientists and it does not require fish to be netted or dealt with, thereby eliminating threat of injuring fish.

And in idea, it might detect all tagged fish transferring by means of the river, not only a cohort that may be electro-shocked or netted. 

Advertisement
A sensor system designed to detect fish implanted with PIT tags has been installed in the Milwaukee River in Milwaukee. The photo shows the ladder-like pipes that house the antennas on the bottom of the river; a rope was temporarily strung above the water to mark the spot.

Schiller has been checking the info every day and at 4 a.m. Wednesday the primary PIT-tagged sturgeon handed upstream by means of the array.

The sturgeon’s 15-digit code recognized it as a fish raised at Riveredge and stocked within the river in 2011, Schiller stated.

It was adopted by one other sturgeon hours later; the second fish was a Riveredge fish stocked in 2007.

Then on Thursday three extra Riveredge-reared sturgeon handed upriver, from the 2008, 2010 and 2011 12 months lessons, respectively.

At mid-week the river’s water temperature was 47 levels Fahrenheit and the move was 1,030 ft per second.

Schiller stated the DNR will proceed to watch the array in addition to go to the river to search for indicators of sturgeon spawning. It is probably extra fish will transfer upriver as water warms.

Advertisement

Sturgeon spawning usually happens when water temps attain from 53 to 59 levels, in accordance with DNR information from the Wolf River.

A number of facets of the Milwaukee River sturgeon restoration venture, together with stocking and fish detection, are actually in place.

It stays to be seen if the fish will try to spawn – they take 15 to twenty years to mature, and no spawning habits has been documented on the Milwaukee – and if the river could have enough habitat to permit profitable copy.

A river mapping venture by Ozaukee County Planning and Parks Division has tried to determine appropriate sturgeon spawning websites within the Milwaukee. 

The fish are recognized to efficiently spawn on rocky substrate with flows about 2 ft per second and better, in accordance with a habitat information by Fred Binkowski, sturgeon skilled on the UWM Faculty of Freshwater Sciences. 

Advertisement

Limestone rocks from 6 to 18 inches in diameter are significantly good for sturgeon spawning, stated Ron Bruch, retired DNR sturgeon biologist and fisheries director who helped restore spawning websites on the Wolf River. Bruch stated grownup sturgeon additionally require a staging space of deeper water comparatively near the spawning website.

“It is great to have sturgeon transferring up the Milwaukee,” Bruch stated. “Now it will likely be a matter of the fish displaying us if they’ve what they want.”

Spring hearings

A “important quantity” of enter was collected on-line Monday by means of Thursday  for the 2022 Division of Pure Sources Spring Hearings and Wisconsin Conservation Congress County Conferences, in accordance with Kari Lee-Zimmermann, DNR liaison to the congress.

This 12 months’s questionnaire featured 63 advisory questions on matters together with continual losing illness administration, deer farms,  walleye administration and wolf looking ways.

Lee-Zimmerman stated the DNR and WCC had been working by means of the info and outcomes needs to be accessible on the DNR’s webpage within the coming week.

Advertisement

Waterfowl laws set

 The Pure Sources Board on Wednesday authorized the 2022 Wisconsin migratory chicken looking season framework and laws.

Hunters could have a 60-day duck season with a six-duck every day bag restrict. 

Opening days shall be Sept. 24 for the North Zone, Oct. 1 for the South Zone and Oct. 15 for the Open Water Zone. A youth hunt shall be held statewide Sept. 17 and 18.

As well as, a statewide early teal season (Sept. 1-9, restrict six teal) and a statewide early Canada goose season (Sept. 1-15, restrict 5 geese) shall be held.

The every day duck bag restrict throughout the regular seasons could embrace not more than 4 mallards (together with a most of two hens), three wooden geese, two black geese, two canvasbacks, two redheads and one pintail.

Advertisement

As well as, particular laws apply to scaup. Hunters within the North Zone and Open Water Zone shall be allowed to take two scaup for the primary 45 days of the season and one scaup for the ultimate 15 days, whereas hunters within the South Zone shall be allowed one scaup for the primary 15 days and a pair of scaup for the ultimate 45.

The DNR obtained greater than 1,400 public feedback because it labored to determine this 12 months’s laws, in accordance with Taylor Finger, DNR migratory chicken ecologist.

For particulars of the 2022 laws, go to dnr.wi.gov.



Source link

Advertisement
Continue Reading
Advertisement
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Milwaukee, WI

Unfinished Legacy, Milwaukee’s fashion phenomenon, taking Summerfest by storm

Published

on

Unfinished Legacy, Milwaukee’s fashion phenomenon, taking Summerfest by storm


MILWAUKEE — There is a new vendor at Summerfest that is quickly growing to be a huge brand not just in Milwaukee but across the country.

Unfinished Legacy is a Milwaukee fashion brand that has collaborated with Muhammad Ali’s estate, the Milverine, and the Milwaukee Bucks. The company is four years old, and opened its flagship location in the Third Ward in 2023.

This year at the Big Gig you can find the brand at the Shop Local Market between the Generac and Miller Lite stages. They also collaborated with Summerfest to create a special shirt for the festival.

The brand is quickly growing. Walk around Milwaukee and it’s not surprising to see people wearing a shirt that says Unfinished Legacy or features the brand’s iconic butterfly.

Advertisement

Unfinished Legacy is a rising fashion brand that is putting Milwaukee on the map. The brand’s success is a testament to their hard work, dedication, and belief in their hometown. For that, they’ve been rewarded with collaboration opportunities with global brands. But this is just the beginning of their Unfinished Legacy.

Watch the video above to learn more about the brand and what it means to be at Summerfest.


Talk to us:

Hey there! At TMJ4 News, we’re all about listening to our audience and tackling the stuff that really matters to you. Got a story idea, tip, or just want to chat about this piece? Hit us up using the form below. For more ways to get in touch, head over to tmj4.com/tips.


It’s about time to watch on your time. Stream local news and weather 24/7 by searching for “TMJ4” on your device.

Advertisement

Available for download on Roku, Apple TV, Amazon Fire TV, and more.


Report a typo or error // Submit a news tip





Source link

Continue Reading

Milwaukee, WI

Milwaukee Tool sued for alleged use of forced labor in Chinese prison factory

Published

on

Milwaukee Tool sued for alleged use of forced labor in Chinese prison factory



Lawsuit against Milwaukee Tool says the company had gloves made in a Chinese prison factory using forced labor, under brutal conditions which included torture and beatings.

Milwaukee Tool has been sued for allegedly having work gloves made by forced labor in a Chinese prison factory under deplorable conditions which included beatings and torture.

The lawsuit filed Thursday in U.S. District Court in Milwaukee claims the Brookfield-based company knew, or should have known, the gloves were made with forced labor, a violation of the U.S. Trafficking Victim Protection Act.

The plaintiff is only identified under the pseudonym Xu Lun, who in July 2021 was convicted of “subversion of state power,” a charge commonly used by the Chinese government to target activists and human rights campaigners.  His real name was withheld from the lawsuit out of fears for his safety, according to the law firm Farra & Wang, of Washington, D.C., which brought the action.

Advertisement

For five months in 2022, Xu Lun was subject to forced labor in the prison factory which allegedly made work gloves bearing the “Milwaukee Tool” logo, according to the suit.

Xu Lun was assigned to sorting fabric, thread cutting, gluing, ironing and quality control, the suit noted. The workdays were up to 13 hours. Prisoners were only allowed a 10-minute break in the morning, a 25-minute break for lunch, and a 10-minute break in the afternoon. They were only permitted up to three days off per month.

“The factories had no air conditioning or heating, and the prisoners were subjected to severe weather conditions,” the suit claims. “The summer months were particularly brutal, with extreme heat and humidity, and poor ventilation. Many prisoners developed eczema and other skin ailments in the hot and humid factories.”

The factories were also laden with fabric dust so severe that prisoners were required to wash it off before they were allowed to take showers. The constant exposure to dust caused respiratory health issues for many of the prisoners, according to the suit.

Advertisement

The facilities were cramped, making it difficult for the prisoners to work comfortably or safely. Some developed health issues such hemorrhoids and prostatitis from long periods of sitting without breaks.

There were workplace injuries caused by the machinery, including fingers punctured by the embroidering machinery, the lawsuit claims.

Lawsuit: workers threatened, punished for not working hard enough

Xu Lun alleged he regularly witnessed fellow inmates being threatened and punished when they refused to work, didn’t work hard enough, or did not meet production quotas.

“Punishment included being forced to stand or squat for long periods of time, being banned from visitation with family, being banned from buying goods with their money, and being forbidden to use the bathroom,” the suit notes.

“More severe punishment included being sent to the high-security section of the prison, being placed in solitary confinement, being forced to walk while squatting, and being woken up every hour with a roll call. The most severe punishment included beatings and electric shocks with electric rods,” according to the suit. “The experience of being exploited and forced into grueling work was humiliating and dehumanizing,” it said.

Advertisement

The Milwaukee Tool products made in the prison were the “Demolition” gloves and “Winter Demolition” gloves, the “Performance” and “FreeFlex” gloves, according to the suit.

“When the gloves came on the market, Milwaukee Tool heavily touted the fact that, unlike other companies that might just use an original equipment manufacturer (OEM), Milwaukee Tool was different. Rather than rely on others for design and manufacturing, Milwaukee Tool differentiated its glove offerings by touting Milwaukee Tool’s ownership of the design and manufacturing processes,” the suit claims.

Milwaukee Tool could not immediately be reached for a response to the allegations. But the company has publicly stated it has no tolerance for forced labor.

Congress held hearings about human rights in China

Last July, a congressional commission examining human rights issues in China turned its attention to the company’s reported connections to forced labor as it examined “corporate complicity” in abuses linked to the Chinese Communist Party. In a hearing, the wife of a man in a prison where the gloves reportedly were made, described the working conditions and railed against what she called Milwaukee Tool’s “disregard for human rights” and called on Congress to act.

Xu Lun worked for a non-governmental organization that advocated for the rights of vulnerable groups in China including persons with AIDs, hepatitis B, and people with disabilities. The suit doesn’t specify damages sought, but the Trafficking Victim Protection Act allows victims of forced labor to file a civil action against companies that knowingly benefited from the practice.   

Advertisement

Milwaukee Tool is owned by Hong Kong-based Techtronic Industries, which is also named in the suit.

Century-old Milwaukee Tool has been one of Wisconsin’s fastest-growing employers, with many of the new positions in technical roles in Menomonee Falls, Brookfield, Milwaukee, Mukwonago, Sun Prairie and West Bend. 

The company has spent hundreds of millions of dollars expanding its U.S. operations in recent years. It has manufacturing plants in the United States, China, Mexico, Germany, the United Kingdom, and Vietnam.

Previously known as Milwaukee Electric Tool Corp., the company traces its history back to the 1920s when Henry Ford was looking for a compact hand drill. 



Source link

Advertisement
Continue Reading

Milwaukee, WI

Milwaukee residents discuss whether they'll watch the presidential debate and why

Published

on

Milwaukee residents discuss whether they'll watch the presidential debate and why


Historically, the first debate of the election cycle has the biggest audience.

In 2020, the first debate between Donald Trump and Joe Biden had 73 million television viewers, according to Nielsen. That’s about 10 million more viewers than the presidential debate before it.

Ahead of Thursday night’s debate, TMJ4’s Tom Durian wanted to know if people in the Milwaukee area would be watching President Biden and former President Trump face off.

The response was pretty mixed.

Advertisement

“Absolutely not,” said Kristin Gravelle. “It’s too stressful for me. I feel like I’m not a big supporter of either really.”

TMJ4, Tom Durian

Kristin Gravelle says she will not be watching the presidential debate.

“I plan on tuning in,” said John Ewing. “I’m actually going to be on the road tomorrow so I won’t see it live but I’ll definitely be watching.”

“Debates have always been a part of my keeping, but this is particularly, I would say, interesting,” added his friend Chris Trost.

John Ewing and Chris Trost

TMJ4, Tom Durian

Advertisement
John Ewing and Chris Trost say they will be watching the debate.

Tom asked Nelson Bennet what topics he hopes to hear discussed during the debate.

Nelson Bennet

TMJ4, Tom Durian

Nelson Bennet says there are a few topics he’d like to get clarity on through the debates.

“Well I am sure its going to bounce up and back — oh he’s a felon, or what about the borders. The country is saddled with certain events, certain situations I hope we get clarity but we’ve got some problems,” Bennet said.

Half the voters Tom talked to said they planned to watch the debate live. Others said they would seek out clips from the debate once it was over.


Talk to us:

Advertisement

Hey there! At TMJ4 News, we’re all about listening to our audience and tackling the stuff that really matters to you. Got a story idea, tip, or just want to chat about this piece? Hit us up using the form below. For more ways to get in touch, head over to tmj4.com/tips.


It’s about time to watch on your time. Stream local news and weather 24/7 by searching for “TMJ4” on your device.

Available for download on Roku, Apple TV, Amazon Fire TV, and more.


Report a typo or error // Submit a news tip





Source link

Advertisement
Continue Reading

Trending