Connect with us

Milwaukee, WI

Should You Use AirTags To Track Your Milwaukee Tools? 5 Things To Consider – SlashGear

Published

on

Should You Use AirTags To Track Your Milwaukee Tools? 5 Things To Consider – SlashGear


Milwaukee power tools are valuable and, occasionally, expensive products. Needless to say, they’re things you’d probably like to keep a close eye on if you can, both because they’re valuable to you and because replacing them would be expensive. This goes double if the Milwaukee tools you’re using are the property of your employer, renting tools out to employees for use on a jobsite. Either way, you need a good way to keep track of those tools.

Advertisement

When it comes to tracking things in today’s world, one of the first options that may spring to mind is a Bluetooth tracking device, such as the Apple AirTag. In theory, an AirTag would be the perfect way to keep track of your Milwaukee tools. They’re readily available and well-known for their tracking efficacy via the Apple Find My app. However, attaching an AirTag to a professional-grade Milwaukee power tool isn’t quite the same as attaching one to a slippery set of keys. There are a few factors you might want to take some time to consider before you go out and buy a massive stack of AirTags.

Advertisement

Do you have a reliable way to attach an AirTag to tools?

The first, and perhaps most obvious question to consider with any AirTag scenario, including attaching one to a Milwaukee tool, is whether or not you actually have the ability to attach one. AirTags are designed to be attached to a variety of different objects and surfaces through the use of various accessories, including sticky pads and mounts, key rings, and wire cable holders. One of these approaches might work for some Milwaukee products, especially simple ones like battery packs, but definitely not all of them.

Advertisement

Let’s say, for example, you’re using one of Milwaukee’s M18 impact wrenches. There isn’t really anywhere on the tool you could hook a keyring or cable holder aside from maybe the belt hook if you aren’t using it, and that’s if you don’t mind it jangling around while you’re using the tool. As for a sticker mount, you would specifically need one just small enough to fit on the tool’s surface, though it’s anyone’s guess how long the adhesive would last in the face of an impact wrench’s heavy vibrational force.

Advertisement

Do you have a way to hide an AirTag?

While Milwaukee tools can be quite valuable, AirTags are no slouches in the pricing department either. A single one of those things costs around $30, and if a would-be thief could pry it loose from whatever you stuck it on, there’s a good chance they’d just run off with the tag itself. This is why a lot of AirTag users prefer to hide their AirTags, either by placing them in an out-of-sight pocket on a bag or building some kind of special mount from scratch.

Advertisement

Making an AirTag mount for a Milwaukee tool that hides its presence to some degree is theoretically possible, but definitely not easy. Unless you happen to be a talented crafter with a good understanding of the AirTag’s dimensions, not to mention the dimensions of whatever tool you’re trying to stick it on, any mount you create is probably going to stick out like a sore thumb. Even if you can hide the large Apple logo from view, ne’er-do-wells might still be made curious by the large lump of plastic you’ve attached to your power drill.

Can an AirTag withstand what you’ll be using the tool for?

AirTags, to their credit, are surprisingly resilient little gizmos. They have an IP67 water and dust resistance rating, and based on tests conducted by publications like CNET, they can handle an occasional spin in the washing machine or an accidental drop onto a hard surface from a few feet up. However, the kind of punishment that an AirTag may endure during common, everyday use is a very different beast from the kind of horrors it may endure on a professional job site.

Advertisement

Advertisement

Job sites are a microcosm of physical punishment and dirtiness, with both workers and the tools they use regularly subjected to constant drops, the scorching heat of the sun, occasional splashes of thick mud, and more. AirTags can only operate in a range of -4 to 140 degrees Fahrenheit; any further in either direction, and you’ll have problems. That’s not even mentioning the potential of sudden impacts and vibrational force that an AirTag may be subjected to while attached to a Milwaukee power tool. An AirTag may be able to withstand an occasional scratch, but there’s not enough information on anything above that, so trying to use one on a jobsite would be a gamble.

AirTags can only be tracked individually by a single user

If you have exactly one Milwaukee tool you want to track that is owned exclusively by you, an AirTag might work. However, if you were looking to add tracking functionality to a variety of tools on behalf of your company or job site, then using AirTags might not be such a good idea. The reason for this is that AirTags, when activated, are tied exclusively to a single Apple ID. Only their original user can track their location via the Apple Find My app on a paired iPhone, Apple Watch, or Mac computer. Unless you’re unusually comfortable with sharing your Apple ID credentials around with your coworkers, nobody else would be able to track the tags’ location, which presents a security risk.

Advertisement

Advertisement

Even putting that aside, attaching an AirTag to a tool doesn’t let you track the tool itself. You can only track the AirTag, and if the AirTag falls off, is stolen, or otherwise misplaced, you might be able to track it down, but the tool may be missing in action forever.

Milwaukee already has its own tracking system

One major reason that attaching AirTags to your Milwaukee tools might be a poor investment is that some Milwaukee tools already have a tracking system built in. Milwaukee has a proprietary tracking system called One-Key, which is operated via the Milwaukee smartphone app. Various high-grade Milwaukee tools, particularly those in the M18 and MX FUEL lines, will have a One-Key Bluetooth tracker embedded in their handles, allowing the app to catalog and track them. Granted, the One-Key tracking system isn’t as comprehensive as the AirTags’, as an AirTag is backed by Apple’s device network, but if you’re only looking for tools in a single, small jobsite, that’s less of a problem.

Advertisement

Advertisement

Even if you’re using lower-end Milwaukee tools that don’t have One-Key trackers built in, Milwaukee also offers standalone One-Key trackers that can be attached to other tools and important objects. These tags have built-in holes for screws, rivets, or zip-ties to hold strong to their targets, not to mention a similarly impact-resistant body to an AirTag. These tags have a simpler, lower-profile design, which might make them a lower-priority target for theft than the well-known AirTag.



Source link

Advertisement

Milwaukee, WI

ICE enforcement in Milwaukee, city accuses feds of violating ordinance

Published

on

ICE enforcement in Milwaukee, city accuses feds of violating ordinance


Milwaukee leaders accuse U.S. Immigration and Customs Enforcement of breaking a city ordinance, while an agency spokesperson stands by officers’ decision to “protect themselves” on the job.

ICE in Milwaukee

Big picture view:

Advertisement

ICE said it arrested 39 people over the weekend. The federal agency said those people were in the country illegally and that many had criminal histories, including for sexual assault and DUI.

FREE DOWNLOAD: Get breaking news alerts in the FOX LOCAL Mobile app for iOS or Android

Advertisement

Voces de la Frontera denied that and shared recent images at a news conference of federal immigration agents masked in Milwaukee. And on Wednesday, a fight erupted over what ICE agents are wearing during the arrests.

“For ICE to be doing this, which is again, against our ordinance, it drives me insane,” said Milwaukee Mayor Cavalier Johnson.

Masked agents

Advertisement

The backstory:

In April, Milwaukee’s Common Council and mayor approved a new ordinance. It bans all law enforcement from wearing masks in public when on duty. It provides exemptions if wearing it for health or safety reasons.

“There’s no need to do that, have masked police in the United States of America,” said Johnson. “We don’t have a Gestapo police in the United States. We shouldn’t have a secret police in the United States. If you engage with a law enforcement officer, you should be able to clearly identify who they are, their badge, their name, and they should identify themselves as such,” Johnson said.

Advertisement

Milwaukee’s ordinance also requires all law enforcement to either wear their name on their uniform and their agency – or when asked – to share that information. It also requires cars be labeled – except for undercover assignments.

“It isn’t that it is not working, it is that it is not being respected,” said Milwaukee Ald. Marina Dimitrijevic. “We will hold people accountable.”

Advertisement

Fines for feds?

What they’re saying:

Breaking the masking and ID ordinance could lead to a fine up to $10,000.

Advertisement

“Who’s going to fine them? It’s not going to be MPD. How do you the fine the federal government? An officer is not going to write a ticket and then give it to an ICE officer,” said Alexander Ayala, Milwaukee Police Association president.

MPD said in a statement that it has requested a formal written legal opinion from the city attorney’s office about the mask ordinance. The city attorney already signed off on the ordinance as legal and enforceable.

Milwaukee County action

Advertisement

The backstory:

Milwaukee County also recently passed an ordinance to ban law enforcement from staging in county parks without prior authorization. The county’s attorney said the legislation couldn’t just target ICE because that would violate constitutional principles, so it said all law enforcement.

SIGN UP TODAY: Get daily headlines, breaking news emails from FOX6 News

Advertisement

Milwaukee County Supervisor Juan Miguel Martinez shared images of what he said were federal agents at the Mitchell Domes.

“Right now the idea is to document and know as much as possible and make sure everybody has eyes on the park…and are looking and documenting to see when and what parks that they are staging at, so later on we can sue them for staging without a permit,” he said. “These are kind of small things that we are trying to get done, but, now allowing them in our parks is the idea here, to slow them down or stop what they are doing, from terrorizing our community as much as possible.”

Advertisement

ICE responds

The other side:

In a statement, a U.S. Department of Homeland Security spokesperson said:

Advertisement

“ICE is targeting criminal illegal aliens including murderers, rapists, criminals, gang members and more. In 2025, nearly 70% of ICE arrests are of illegal aliens charged or convicted of a crime in the U.S.

“Enforcing federal immigration laws is a clear federal responsibility under Article I, Article II and the Supremacy Clause.

“While Milwaukee sanctuary politicians continue to release pedophiles, rapists, gang members, and murderers onto their streets, our brave law enforcement will continue to risk their lives to arrest these heinous criminals and make Milwaukee safe again.

Advertisement

“Sanctuary politicians attempting to ban our federal law enforcement from wearing masks is despicable and a flagrant attempt to endanger our officers. To be crystal clear: we will not abide by unconstitutional bans. The Supremacy Clause makes it clear that Milwaukee’s sanctuary politicians do not control federal law enforcement.

“ICE officers wear face coverings for one reason: to protect themselves and their families from real-world threats including agitators. The danger is not hypothetical. Public databases and online “lists” have been created to expose officers’ identities. Today, our ICE law enforcement officers face a more than 1,300% increase in assaults, 3,300% increase in vehicular attacks, and an 8,000% increase in death threats against them.”

Advertisement

The Source: Information in this story is from FOX6 News interviews, prior coverage of the city and county ordinances and a statement from an ICE spokesperson.

ImmigrationNewsMilwaukee



Source link

Advertisement
Continue Reading

Milwaukee, WI

Connecting Milwaukee teens to summer work

Published

on

Connecting Milwaukee teens to summer work


MILWAUKEE — There’s a push to get more teenagers working over the summer, but it comes at a tough time.

The number of jobs secured by teens fell 25% last summer compared to the summer of 2024, according to the US Bureau of Labor Statistics.

That trend seems to be continuing, as many services that help place people in jobs report that there are even fewer opportunities for teens this summer.

Advertisement

What You Need To Know

  • Teen summer job opportunities have dropped significantly, with a 25% decline in jobs secured by teens last summer compared to 2024
  • In response, Milwaukee County, city and school district leaders are partnering to offer paid internships to high school students
  • The internships begin with classroom preparation before students are paired with local businesses, nonprofits and government offices for seven weeks
  • Despite high demand for these paid positions, the program’s growth depends on public and private funding, and more businesses willing to participate


Milwaukee County, city and school district leaders are working to change that by offering paid internships to high school students.

Spectrum News met up with some of them at Milwaukee Area Technical College (MATC) where they take some job-related classes before starting their internships.

Milwaukee Public School student, Keira Cruz, got into the hospitality and tourism internship.

“I wanted to learn more from it and maybe in the future, become an event planner,” said Cruz, who’s going into her senior year at South Division High School.

Across campus, another group of MPS students is learning how to make their own professional pages and search for jobs on LinkedIn.

“There’s so much stuff out here that you could do to end up where you want to be,” said Mahogonie Wright, who attends James Madison Academic Campus and wants to pursue a career in healthcare. “It’s a pleasure to be able to do anything that, you know, enhances my possible career choices.”

Advertisement

After some classroom preparation, students are paired with a local company, small business, nonprofit or city/county office for seven weeks.

The goal is to match them in the field they’re interested in. This is tied to Employ Milwaukee’s Earn and Learn program.

Teens work 20 hours per week and earn a wage of about $12 an hour.

“It creates a better sense of self for that student,” said Emily Brown, internship coordinator for MPS. “A better sense of purpose, so that hopefully one day they will find their passion.”

Brown said students must demonstrate a commitment before being accepted into the program.

Advertisement

“If we can’t see that you’re coming to school every day, how are we going to know that you’re going to go to that internship or opportunity every day?” she asked.

Paid summer internships for teenagers are in high demand, as fewer employers are hiring seasonal workers.

Brown doesn’t want to turn interested students away, but growth of the internship program is reliant on public and private grants, donations and businesses willing to participate.

“We’re always looking for additional partnerships so that students can extend what they learn in the classroom into the real world,” Brown said.

Both Kiera and Mohagonie acknowledged that these opportunities give them something productive to do while they’re out of school. They’d like to see all Milwaukee high schoolers get this chance.

Advertisement



Source link

Continue Reading

Milwaukee, WI

Career minor-leaguer Garrett Stallings gets his shot with the Brewers

Published

on

Career minor-leaguer Garrett Stallings gets his shot with the Brewers


play

Garrett Stallings was in position to hit a pretty big milestone with Class AAA Nashville.

“Someone told me this week I would have hit my 600th minor-league inning, which is kind of crazy for someone who hadn’t made it to The Show yet,” Stallings said on Tuesday – but from the Milwaukee Brewers dugout at American Family Field after the right-hander had been selected to the 26-man roster.

Advertisement

“But the whole time I’ve kind of put my head down and continued to go at it, and the work’s really paid off.”

Stallings, 28, was in the midst of his best minor-league season to date with the Sounds, posting a 3-3 record and 3.45 ERA in 16 appearances (12 starts) and 59 strikeouts in 62 ⅔ innings. His last six outings have been starts, but with the Brewers he’ll join a bullpen group that’s been ridden hard in recent weeks.

“Really, just learned how to be a reliever really quickly,” said Stallings when asked how things changed for him with Milwaukee. Originally a fifth-round pick of the Angels out of the University of Tennessee in 2019, he was traded the following year to the Orioles and then to the Brewers in 2024 in exchange for right-hander Thyago Vieira and minor-leaguer Aneuris Rodriguez.

Stallings re-signed with the Brewers as a minor-league free agent in the offseason after pitching in a career-high 30 games in 2025

“I’d been a starter my whole career, and just continued to be adaptable,” he continued. “In order to get your name called you can’t just tailor to one thing. That’s really helped broaden my horizons in the game, and as many different situations you can be in, it’s helped me just adapt to the game and keep my head up and be the best version of myself.”

Advertisement

Stallings lacks the electric fastball and truly nasty stuff that defines so many pitchers these days, instead relying upon moxie and a willingness to try new things.

“I’ve always been a throw-every-type-of-pitch (guy),” he said. “I’ll tinker this side of the rubber or this side and I’m always one that will always at least try new things to see if I can get that edge. I think if anything, the experience of throwing 600 minor-league innings you learn a lot along the way. And it comes with failure, too.

“It hasn’t always been the easiest path. But this year I feel like I’ve just been able to keep getting a little bit better.”

Stallings joked that he’s felt at times like he’s been the best player in the minor leagues and at other times the worst, with the cumulative experiences helping shape him into a reliever being asked to contribute outs whenever he receives the opportunity.

Advertisement

“I talked to him today,” said manager Pat Murphy. “That’s the best part. You get to sit here and let those guys come in, knowing how he grinded and stuck with it and hung with it and probably didn’t believe for a while that he would (make it).

“Then, to finally believe and get that phone call, I immediately think about his mom and dad, He’s got a fiancee, his brother and sister are coming. That’s really cool, and even cooler when he gets up (to pitch).”

Stallings, a native of Chesapeake, Va., could receive that chance as soon as tonight as the Brewers try for their fifth win in as many games against the Cincinnati Reds this season.

“It’s a dream come true,” he said. “It’s been a long time coming.”

Advertisement

Stallings becomes the 45th player to appear on Milwaukee’s active roster this season and seeks to become the sixth to make his major league debut.

To clear space on the 26-man roster, left-hander Robert Gasser was optioned to the rookie Arizona Complex League Brewers, a procedural move that will allow him to be available July 7 when Milwaukee will need extra starting pitching for its doubleheader against the St. Louis Cardinals at Busch Stadium.



Source link

Advertisement
Continue Reading
Advertisement

Trending