Michigan
Another chance for Northern Lights in Michigan tonight: What to know
Many people in Michigan got a chance to see the Northern Lights on Friday and Saturday night, and if the weather cooperates, we might get another chance Sunday night.
When is the best time to look for Northern Lights in Michigan?
According to the NOAA, the best time to view the aurora is usually within an hour or two of midnight. So, between 10 p.m. and 2 a.m.
Northern Lights forecast map
Here’s a look at the projected forecast: The red line shows how far south the aurora could stretch.
Northern Lights viewing tips:
-
Look north! The aurora will likely be on the horizon but higher in the sky the further north you are.
-
Dim the lights: Find an area with less light pollution for your best chance.
What are the Northern Lights?
The bright dancing lights of the aurora are actually collisions between electrically charged particles from the sun that enter the earth’s atmosphere. The lights are seen above the magnetic poles of the northern and southern hemispheres.
They are known as ‘Aurora borealis’ in the north and ‘Aurora Australis’ in the south.. Auroral displays appear in many colors although pale green and pink are the most common. Shades of red, yellow, green, blue, and violet have been reported.
The lights appear in many forms from patches or scattered clouds of light to streamers, arcs, rippling curtains or shooting rays that light up the sky with an eerie glow.
What are coronal mass ejections?
CMEs are explosions of plasma and magnetic fields from the sun’s corona. They cause geomagnetic storms when they are directed at Earth.
Geomagnetic storms have been known to impact infrastructure in near-Earth orbit and on Earth’s surface. This could potentially disrupt communications, the electric power grid, navigation, radio and satellite operations.
According to SWPC, only three severe geomagnetic storms have been observed during this solar cycle, which began in December 2019. The last G4 (severe) was spotted on March 23, 2024, this triggered a geomagnetic storm alert.
Extreme (G5) geomagnetic storm conditions were observed on Earth at 6:54 p.m. on Friday. The geomagnetic storm is likely to continue through the weekend and will continue to lessen in severity until it comes to an end on May 13.
The last G5 (extreme) caused the Halloween storms in October 2003. That G5 caused power outages in Sweden and damaged power transformers in South Africa.
—> Read more on geomagnetic storms
Copyright 2024 by WDIV ClickOnDetroit – All rights reserved.
About the Authors
ROTHBURY, Mich. — Michigan State Police (MSP) detectives shared some more information Friday about their investigation of the infant death at this year’s Electric Forest music festival in Rothbury.
Troopers recently received a tip about a Muskegon woman who was said to have information about the incident, but after interviewing her and completing other necessary investigative steps, MSP said they ruled her out as a suspect.
A restroom vending company employee at the festival found the body of a neonate, a newborn infant who is four weeks old or younger, in a portable restroom in the festival camping area on June 28, according to troopers.
The festival is hosted at the Double JJ Resort, which was locked down to anyone entering the following day as police surrounded the scene.
Troopers are asking for tips from the public at michigan.gov/michtip.
GRAND RAPIDS, Mich. (WOOD) — Harmful algal blooms have been reported on two notable lakes in West Michigan: Gun Lake and Muskegon Lake.
The Michigan Department of Environment, Great Lakes and Energy says cyanobacteria was reported on Muskegon Lake July 3, but no tests have confirmed it.
The Barry-Eaton District Health Department says a harmful algal bloom was confirmed Thursday on Gun Lake. The lake remains open, but the BEDHD is encouraging visitors to use caution and avoid water that has “visible algae.”
Visitors are encouraged to avoid any contact with water that appears bright green, blue-green, brown or red or has “floating mats of scum.”
Pets should also avoid the water. If they come into contact with the algae, pets should be rinsed off as soon as possible with clean, fresh water.
Exposure to algae can cause a rash or irritation to the skin, eyes, nose and throat. It can also cause stomach cramps, nausea, vomiting, diarrhea, headache, fever and trouble breathing.
“If you become sick, contact your healthcare provider. Seek medical care right away if you have trouble breathing, severe vomiting, or other serious symptoms,” the BEDHD said in a statement. “If your pet was exposed, rinse them well with clean water and do not let them lick their fur until they have been washed. Contact your veterinarian right away if your pet has vomiting, diarrhea, weakness, trouble walking, excessive drooling, shaking, or seizures.”
Harmful algal blooms are powered by the sudden growth of cyanobacteria, also known as blue-green algae. Cyanobacteria occur naturally in lakes, rivers and ponds but is often boosted by a sudden excess of nutrients, often caused by fertilizer runoff from farms or failed septic systems.
They can last for several days and sometimes even months. The water will look “scummy” or like “spilled paint or pea soup.” They are typically found in the summer and fall — usually peaking in August or September and dying off by the end of October.
You can report a suspected harmful algal bloom to EGLE at AlgaeBloom@Michigan.gov or 1.800.662.9278.
Sterling Stamping Plant is the largest in the world
Ed Daniels, vice president of North America injection and stamping operations, discusses the process of producing metal parts for Stellantis models.
Warren — Hulking metal presses line one wall of Stellantis NV’s cavernous stamping plant here, punching out the raw shapes of Jeep doors, Dodge hoods and Ram tailgates in rapid succession.
Nearby, swinging yellow robots continue the tightly choreographed work, gluing and pressing and welding smaller components to the sheet metal that eventually will start to resemble the shape of a truck or SUV.
Seven miles north, in Sterling Heights, Stellantis operates an even larger stamping plant — the biggest in the world, at 2.7 million square feet — that does much of the same work, churning out various shapes of steel and aluminum 24 hours a day.
Together, these lesser-known links in the manufacturing supply chain support all of Stellantis’ big North American assembly plants — from next-door Warren Truck Assembly Plant, where the Jeep Grand Wagoneer SUV is built, to facilities in Windsor and Mexico that make minivans and pickups.
Inside Stellantis’ Huge Detroit Stamping Plants
The Detroit News recently got a rare look inside the automaker’s Sterling and Warren stamping plants, which are key to the company’s turnaround plan.
The Metro Detroit stamping plants, the automaker’s only two such facilities in the United States, have at times struggled in recent years, facing major job cuts and worker morale issues amid slowing sales and shifting production plans. But under Stellantis CEO Antonio Filosa, the facilities are expected to cram in more workload — and add staff — as Stellantis begins a new five-year strategic turnaround plan, which includes a heavy focus on its most profitable North American market.
The carmaker’s goal: grow sales by more than a third to 1.9 million annually by 2030 as it launches 23 vehicles, including 11 all-new models. The company also is directing billions of dollars of investment into its U.S. manufacturing footprint due to President Donald Trump’s tariffs.
“Stamping has never really been viewed as the sexy side of automotive manufacturing, we’re relatively invisible,” said Ed Daniels Jr., vice president of North America injection and stamping operations. “Because when you look at the commercials and advertisements, it’s always a beautiful Ram rolling off the assembly line or climbing the side of a mountain.
“But we’re the inception of that vehicle,” he said. “This is where raw materials are turned into commodities and parts.”
The Detroit News recently got a rare look inside the two plants that combined employ about 3,000 people. The automaker wanted to show off a newly-installed blanking press at Warren Stamping and other machinery like a high-speed transfer press and a robot that spots flaws in the metal.
Hiring expected
The blanking press unspools long coils of metal and chops them up into pieces that can then be shaped into roofs, fenders and floor pans. Stellantis shipped the massive machine to Warren from its idled Belvidere Assembly Plant in Illinois last year.
After upgrades to the machine, executives said it’s able to produce as many as 120,000 metal blanks per week. It will save Stellantis money since the plant will no longer need to pay a supplier to break down the coils before the metal arrives there.
The blanker addition is a big deal for the plant and signals that the company wants to bring more work in-house and invest in the facility over the coming years, said Romaine McKinney III, president of United Auto Workers Local 869, which represents workers at the factory.
The plant has already brought back all of its laid-off UAW workers, and McKinney said he anticipates more hiring to get underway if sales grow and new Stellantis vehicles come to market.
In another corner of the Warren facility, one of the fastest press lines in the world — known internally as the Hellcat — pushes as many as 15 pieces of metal through per minute. Dies that weigh up to 50 tons apiece squish the material into the shapes of doors and hoods before robotic arms snatch them out and place them on conveyor belts. Midway through a shift, workers can reconfigure the machine to make a different component, a process that takes just five minutes.
Robots check for quality
Curtis Booth, who manages Warren Stamping, said manual processes inside the plant have become increasingly automated, and safer, over the last couple decades, even as the automaker’s two stamping factories still utilize some presses that were installed in the 1960s.
The latest high-tech addition is the Automated Body Inspection System, or ABIS. It’s a camera system mounted on a robot that automatically checks the quality of components and flags anything in need of repair.
Auto plants of all kinds are increasingly turning to these types of camera systems, infused with artificial intelligence, to catch flaws in sheet metal and other components before they are shipped. Booth said worker visual inspections are still used. But in some cases the human eye has too much subjectivity, and the ABIS removes the guesswork.
Greg Bauer, who manages Sterling Stamping, said his plant has added staff over the past year, and expects to continue hiring as more work is assigned to the facility. There is no space at the plant to add more presses, but officials have figured out how to increase efficiency — quickly toggling back and forth between making doors for a Chrysler Pacifica and Dodge Charger on on a single machine, for example.
“We want to bring high-volume parts into the plant, and we want to maximize the capacity of the equipment,” Daniels said.
lramseth@detroitnews.com
-
Health7 minutes agoEating common dairy food every day may slow biological aging, study suggests
-
Sports10 minutes agoCM Punk to defend Undisputed WWE Championship against Cody Rhodes at SummerSlam
-
Technology15 minutes agoWould you pay $8,000 for a robot to fold laundry?
-
Business22 minutes agoLegendary Television City may be be sold in further blow to Hollywood
-
Entertainment25 minutes ago‘Foreign Tongues’ is the funniest Rolling Stones album in decades
-
Lifestyle30 minutes agoHow to have the best Sunday in L.A., according to Deidre Hall
-
Politics37 minutes agoTrump administration clears path for controversial Mojave Desert water pipeline
-
Sports45 minutes agoWorld Cup fans flock to In-N-Out, Erewhon and Trader Joe’s for a taste of California
