Connect with us

Technology

This whistle fights fascists

Published

on

This whistle fights fascists

Kit Rocha and Courtney Milan have a knack for drawing attention to a cause. The bestselling romance novelists helped raise half a million dollars for Georgia voting rights in 2020. Now, their cause is whistles, because whistles let neighbors alert each other when they see ICE agents abducting people. They’ve helped create a group that’s shipped a half million free 3D-printed whistles to 49 US states — 200,000 of them in the first week of February alone.

Even I print whistles now. It’s the first thing I do each morning after dropping kids at school, and the very last before bed. Usually, I squeeze in a hundred more after dinner.

I print whistles because reality still matters; whistles get neighbors to come running, make sure enough people are recording, so when the regime pretends there’s only one camera angle of Renee Good’s death, we know the truth.

I also make whistles because it’s easy. You can literally do it in your sleep. I’ve made over 12,000 whistles since January 15th with three printers and almost zero optimization. I’ll harvest 300 of them tomorrow morning, 300 in the late afternoon, and another 100 in the evening before I do it all again.

Printing whistles is more cost-effective than drop-shipping them from China. Even if I bought filament at retail prices and paid PG&E’s full exorbitant California electricity rates, I’d be spending around 5 cents per whistle — and the unit economics only get better from there.

Advertisement

Across the country, people are realizing these printers can serve a bigger purpose than building toys and trinkets. Whether someone is looking for 100 whistles to protect friends and family, 200 for a church or school, or 1,000 for a whole neighborhood, requests are flooding in, each one vetted and added to a spreadsheet by volunteers.

No one is told what to do, which whistle to print, or which request to fulfill. These Signal chats feel like a community, building and innovating everything as we go.

The whistles weren’t always 3D-printed. Last summer, some protesters at No Kings rallies already carried whistles to make noise. Following the 2025 raids in Los Angeles, Latino day laborers learned to carry whistles to alert each other about ICE. But Chicago may have proved that 3D-printed whistles could be the future of neighborhood-by-neighborhood organizing.

Emily Hilleren wished she’d been there on October 1st when, she later heard, ICE abducted someone right in front of her nearby school. She was never more than two blocks away the entire time, she tells The Verge, but she never had the opportunity to help. If her neighbors had whistles, they could have blown them and rushed to document the abduction. She decided to make whistles her mission.

She already had a small stash of whistle kits she’d packaged with friends just the previous evening. She’d heard how nearby Little Village had adopted the Los Angeles whistle techniques to warn about ICE raids, how the local Pilsen Arts & Community House had similarly been inspired by LA to create whistle-packing parties last August.

Advertisement

Originally, she figured she’d simply put her whistle kits into a little free library, the kind neighbors use to share books. But the abductions galvanized her to do more. She began hosting her own Whistlemania events at local bars, pairing the Pilsen Arts’ zine with cheap, premade whistles she found on Amazon. She says she spent a couple of thousand dollars, eventually setting up a GoFundMe to recoup her costs.

Pilsen Arts’ Form a Crowd, Stay Loud teaches the Whistle Code: Blow in short bursts if you see ICE nearby; blow long blasts if they’re detaining someone. Cofounder Teresa Magaña tells us her zine is now distributed in 25 states and was directly inspired by this video from comedian Marquez Acuna.

Soon, the supply of cheap Amazon whistles dried up. But that’s when those bestselling romance novelists entered the picture.

Before Romancelandia showed up for us, it showed up for Emily Hilleren, when Rocha sent some of her very first shipments of 3D-printed whistles to Chicago so the whistle parties could continue. When Border Patrol largely left Chicago, Hilleren returned the favor. She found she still had thousands of whistles piled in her living room, whistles that were needed elsewhere. So she joined forces with Rocha’s online group, which refocused on producing and distributing nationwide.

Like many whistlemakers who were already 3D printing enthusiasts, I started by using whatever leftover filament I had on the shelf. Each 1-kilogram (2.2-pound) roll of plastic produces roughly 500 whistles, depositing the molten string layer by layer to build objects from the ground up. My supply didn’t last long, but I didn’t have to buy more after that — because whenever Kit Rocha and her author friends spread the word that supplies are running low, donors come out of the woodwork. An hour after her Bluesky post, weeks’ worth of filament was on its way to my door.

Nor do whistlemakers necessarily have to pay for postage, because Hilleren brought her GoFundMe along for the ride. Today, she uses those donations to reimburse whistlemakers with shipping receipts, and says she puts any leftover money toward community aid.

So far, donors largely buy filament for us through Amazon wishlists, and Amazon is a company the community has mixed feelings about. But groups like ours have convinced at least one small filament maker, Protopasta, to supply the whistle effort. Operations manager Heidi DiJulio tells me the company’s ready to donate hundreds of rolls of filament, and has today it’s launching a program where donors can support us with its small-batch filament for $20 a roll, competitive with what Amazon charges.

Advertisement

By December, over 20 members had shipped 40,000 whistles. Then ICE came to Minneapolis and killed Renee Good.

“So many people were so upset and they didn’t know what to do, and we could say, here is something you can do,” Rocha tells me. “You can join a print. You can send us filament. You can go find people who need whistles and direct them to us. I think in that moment of pain, that is really when it started to take off.”

A woman blows her whistle at US Border Patrol agents at a gas station in Minneapolis, Minnesota, on January 21st.

A woman blows her whistle at US Border Patrol agents at a gas station in Minneapolis, Minnesota, on January 21st.
Photo by Roberto Schmidt / Getty Images

A month later, the “Whistle Crew” has over 180 members — sharing their sparkly creations, asking for printer advice, and attempting to improve the group’s processes at almost every hour of the day. Shortly after I joined, one spun up a Whistle Crew Wiki to answer frequently asked questions and help newcomers navigate. Others create new whistle designs that print faster to meet growing demand.

Many stick to printing derivatives of two particular whistles, the ACstudio Micro Bitonal and the Penne. The Micro Bitonal is an incredibly shrill, ear-piercing two-tone whistle that needs only a light blow; the latter uses more air to produce a simpler sound, but has been explicitly tweaked for mass production. But I see lots of hearts and quite a few BakedBeans now, too. Some makers print emergency telephone numbers or slogans atop the whistles, like “Fuck ICE” or “4 Good,” while others beautify them with wavy patterns. I keep it simple by printing most out of multicolor filament.

It’s not entirely foolproof. One morning, I woke up to find my printer fan had mysteriously detached, a frozen explosion of rainbow plastic waiting inside its chamber. Another time, I found a half-printed plate of whistles because my Elegoo Centauri Carbon review unit couldn’t quite tell when it ran out of filament and kept “printing” on air. My Bambu Lab P1P lost two to three whistles per print due to poor bed adhesion, until I added a BIQU Panda Cryogrip Frostbite plate that sticks so well, the whistles make a satisfying pop when I bend the plate to detach them.

Advertisement
Inside the box of a 3D printer, strings and gobs of rainbow filament are strewn across the bed, hang from the platform inside, and cover its floor.

I don’t know how this rare print failure happened, but it was quite a mess afterwards.
Photo: Sean Hollister / The Verge

There was the day I found a previously working whistle design had started producing entire plates of silent whistles. And like many other whistlemakers, I once made the mistake of thinking my printer could automatically arrange an entire plate of whistles without fusing them all together.

Over 500 rainbow whistles, stacked three high, sit atop the bed of a tiny Bambu A1 Mini printer. They were all printed at once.

Some makers print stacks of whistles, like a layer cake, so even the smallest printers can produce hundreds in one go.
Photo: Rich Bowman

But generally, it works. With the Bambu printers, I can press a button on my phone to start a plate of 105 whistles and expect each to blow loud and shrill. I test one sacrificial whistle from each plate, then throw that whistle away. I don’t even need to use desktop software: Another maker had already created and uploaded the 105-whistle plate to Bambu’s phone app.

3D printers were nowhere near this reliable even five years ago. “It’s pretty mind-blowing now to just take a thing out of a box, do minimal setup and be printing,” says journalist Dan Sinker, also a member of the Whistle Crew. “Like I was printing a plate of whistles probably 30 minutes after plugging it in, and then I never stopped.”

Courtney Milan is the pen name of Heidi Bond, a former US Supreme Court law clerk who wants to protect whistlemakers from possible government bullies. While she says she can’t give legal advice, she helped the group establish ground rules to avoid anything that could be interpreted as a conspiracy to interfere with ICE.

“We’re 3D-printing tools to allow people to exercise their First Amendment right to assemble and to redress the government for grievances,” she says. “We are not trying to enable any other behavior.”

Advertisement

The first rule of Whistle Chat is that anyone posting about illegal activity immediately gets banned. The second is that whistlers are “a loose collective of 3D printing enthusiasts” who merely coordinate with one another, and that admins don’t control the group.

Admins are careful when people ask for the free whistles, too: “If anyone is requesting whistles for a purpose that is not a lawful purpose, we will not fulfill that request.”

It hasn’t happened yet. “If somebody sent us that email, they’re probably a fed trying to entrap us, right? When ordinary people reach out to us, they say, ‘I’m trying to keep my community safe.’”

Bond is worried her rules may not be enough, now that the Trump regime is arresting journalists for exercising their First Amendment rights and claiming Alex Pretti deserved to die for exercising his Second Amendment right. There’s reason to believe they might crack down on whistles, too: They’re already driving MAGA provocateurs up the wall, with one calling them “hearing loss causing machines that terrorists use against ICE.”

Bond calls bullshit: “If we ‘impede ICE’ simply by being there and observing them, the thing that is happening is not us impeding ICE in the exercise of its power, it is ICE being too ashamed to do unlawful acts when being watched by people.” She says it’s time to take a stand, that “the freedoms we enjoy will go away if we do not exercise them.”

Advertisement

Sometimes, I think: Whistles don’t stop bullets. They didn’t save Renee Good. They didn’t save Alex Pretti. “It doesn’t help. It doesn’t really serve a purpose other than shame,” one woman tells me, and for a brief moment, I wonder if that’s true.

But when I share my thoughts with Rocha and other whistlers, they say the whistles are also about human connection, about sharing and displaying a physical symbol that you’re here for your neighbors, knowing you’re not alone, starting a dialogue that can lead to phone trees and mutual aid networks, finding power when you feel powerless.

It’s our blood and bones, and these whistles and phones, against Miller and Noem’s dirty lies

— Bruce Springsteen, “Streets of Minneapolis”

“Once I started giving out whistles, I started seeing how when you directly help somebody it impacts not just others but yourself, because a lot of anxiety is wrapped up in the loss of control,” a man named Matt from Minneapolis tells me.

America Garcia, a first-generation Mexican American, says she felt the power firsthand. She was packing her car one day and heard honking, saw ICE on the corner of her street, immediately feared for her immigrant mother, and started blowing her whistle. “It was this burst of adrenaline,” she tells me, “and once I started hearing the collective whistling on my block, it felt even more powerful.”

Advertisement
A pile of blue 3D-printed whistles in every orientation, with the phone number 612-441-2881 pirinted on one side and “Monarca” on the other.

Sometimes we get custom orders asking us to print ICE rapid response hotlines or messages on the whistles.
Photo: Star Stuff

While ICE detained the two men they were after, she hopes it may have saved other vulnerable immigrants who heard the whistles and took it as a sign not to leave their homes.

Maureen “Mo” Ryan, a contributing editor at Vanity Fair who introduced Rocha to Hilleren and carries a whistle at all times, says it makes her feel “like maybe I’m not totally helpless if something terrible happens to my neighbors,” because “I can alert others and they might be able to stay safe even if I can’t prevent what’s happening in front of me.”

Hilleren says, “My neighbors are being snatched, they’re being ransomed, they’re being separated from their families, and I can’t stop it. But knowing that I’m trying and seeing all the other good people who are trying, that reminds me that a better world is possible.”

Besides, sometimes shame does work right away. I think of the powerful words of Dan Sinker, describing a moment in Chicago when the whistles, and the people they summoned to witness, stopped ICE in its tracks.

“A report rang out that a child was hiding, and people converged. Whistles around necks, a half-dozen in moments. One heard whistles when dropping her own child off at school. Another rode up on a bike. Everyone unsure of what to do except to do what any parent would do: ensure a child is safe,” Sinker wrote. “The child was safe.”

Advertisement

Bond says that while whistles may not stop bullets, they can stop bullies by making their actions socially unacceptable.

“The whistle says, ‘We will stand up and we will watch, and we will judge you and we will remember, and we will witness. And you will not get away with it,’” says Bond. “‘You may think you’re doing it right now, but you will not get away with it.’ That’s what a whistle says.”

Follow topics and authors from this story to see more like this in your personalized homepage feed and to receive email updates.

Technology

Mark Zuckerberg is taking the stand as social media goes on trial

Published

on

Mark Zuckerberg is taking the stand as social media goes on trial

Lori Schott didn’t care what it took to haul her way from her small town in Eastern Colorado to show up to a Los Angeles courtroom where Meta CEO Mark Zuckerberg is set to testify Wednesday. “I don’t care if I had to hire a pack mule to get me here, I was going to be here,” she told The Verge outside the courthouse Tuesday.

Schott’s daughter Annalee died by suicide at age 18 in 2020, after struggling with body image issues that her mother says were heightened by social media. After her death, Schott found journal entries where Annalee disparaged her own looks and compared herself to other girls’ profiles. “I was so worried about what my child was putting out online, I didn’t realize what she was receiving,” Schott said.

The way that Meta and Google-owned YouTube designed their products — allegedly luring users into a nonstop loop of taps and scrolling — is at the heart of this month’s bellwether social media trial, which sets the stage for thousands of similar lawsuits. The companies have generally denied the claims. Schott and several other self-described survivor parents have made it their mission to be in the courtroom during the several-week trial in downtown LA.

“I was so worried about what my child was putting out online, I didn’t realize what she was receiving.”

Last week, the parents heard from Instagram CEO Adam Mosseri, who used his time to carve a distinction between clinical addiction to social media and what he called “problematic use.” On the stand, Mosseri testified that using Instagram “too much” is a relative thing that can vary person-to-person, and he wouldn’t use the term addiction for using social media up to 16 hours a day. Mosseri explained why Meta had modified a prior ban on image filters that altered users’ appearance, after previously discussing their potential negative mental health effects. While the plaintiff has argued Meta is motivated by profits and engagement at the expense of users’ safety, Mosseri said that the two are aligned. “In general, we should be focused on the protection of minors, but I believe protecting minors over the long run is good for business and for profit,” he said, according to CNBC.

Advertisement

Several parents camped out overnight in the rain to make sure that they would get spots behind Mosseri while he took the stand. One of them was Julianna Arnold, whose daughter Coco died of fentanyl poisoning at 17 after allegedly meeting a dealer on Instagram she believed had sold her Percocet. The parents wore rain ponchos, played cards, drank coffee, and told stories throughout the night. “Everyone was like, you’re crazy,” she said. “But it didn’t feel like we were crazy, because we were so determined to have survivor parents in the courtroom.”

For Schott, who also stayed overnight to see Mosseri’s testimony, the reality of being in the room quickly became overwhelming. “I really hoped in my heart that it wasn’t as bad as it was,” said Schott, who left the testimony early after hearing the Instagram CEO discuss documents about engagement, profits, and internal research about girls’ mental health. “It is that bad.”

“I want him to see my face, because my face is Anna’s face.”

On Wednesday, Zuckerberg will likely expand on Mosseri’s testimony and explain the company’s choices. While Mosseri is in charge of the product at the center of the trial, Zuckerberg’s role as founder and CEO means that the plaintiff’s lawyers will likely ask him to account for choices they allege harmed young users. Zuckerberg will likely be asked about how and why his company made various design decisions, and research it conducted on user safety. But at least as important as what Zuckerberg will say, for many, is that he’ll get to see their faces. “I’d love to look him in the eye,” Schott says. “I want him to see my face, because my face is Anna’s face.”

Zuckerberg’s testimony will likely be referenced at future trials and legislative hearings. Thousands of social media cases behind this one similarly argue that products like Instagram caused various personal injuries, and that companies should be made to pay damages and change their products to make them safer.

Advertisement

Arnold isn’t sure whether she’ll get one of the limited, lottery-assigned seats inside the courthouse. Either way, “I want to see a row of survivor parents in the front row. That he has to testify to our faces, to parents of kids that died because of his lack of care and lack of accountability — that’s why it’s really important that we’re here.”

Follow topics and authors from this story to see more like this in your personalized homepage feed and to receive email updates.

Continue Reading

Technology

Don’t ignore Apple’s urgent security update

Published

on

Don’t ignore Apple’s urgent security update

NEWYou can now listen to Fox News articles!

If you use an iPhone, iPad, Mac, Apple Watch or Apple TV, listen up. Apple has released a major security update to fix a zero-day vulnerability, which is a security hole that hackers discover and exploit before the company has a chance to fix it. 

Attackers were already using it in targeted attacks. In other words, this was not just a possibility. It was happening.

The flaw, tracked as CVE-2026-20700, affects multiple Apple operating systems. If you have delayed updates lately, this is one you should not ignore.

If you own an Android or Windows PC, this is also a good reminder to check for updates. 

Advertisement

Sign up for my FREE CyberGuy Report 
Get my best tech tips, urgent security alerts and exclusive deals delivered straight to your inbox. Plus, you’ll get instant access to my Ultimate Scam Survival Guide – free when you join my CYBERGUY.COM newsletter.

APPLE PATCHES TWO ZERO-DAY FLAWS USED IN TARGETED ATTACKS

Apple’s latest security updates affect iPhone, iPad, Mac, Apple Watch and Apple TV, so now is the time to check every device you own. (iStock)

What is CVE-2026-20700 and why it matters

CVE-2026-20700 is a memory corruption vulnerability affecting:

  • iOS 26.3
  • iPadOS 26.3
  • macOS Tahoe 26.3
  • watchOS 26.3
  • tvOS 26.3
  • visionOS 26.3

In simple terms, this bug could allow an attacker to run arbitrary code on your device. That opens the door to spyware, hidden backdoors or silent takeovers without obvious warning signs. Apple says this vulnerability was used as part of an infection chain combined with two previously patched flaws against devices running older versions of iOS. Those earlier bugs were fixed in December 2025. Devices that skipped those updates remained exposed. This is how many real attacks unfold. Hackers chain vulnerabilities together and quietly move in.

Which devices need updating?

Here is a breakdown of the available updates:

Advertisement
  • iOS 26.3 and iPadOS 26.3 for iPhone 11 and later, plus newer iPads
  • iOS 18.7.5 and iPadOS 18.7.5 for iPhone XS, XS Max, XR and iPad 7th generation
  • macOS Tahoe 26.3, Sequoia 15.7.4, Sonoma 14.8.4
  • tvOS 26.3 for Apple TV HD and Apple TV 4K
  • watchOS 26.3 for Apple Watch Series 6 and later
  • visionOS 26.3 for Apple Vision Pro
  • Safari 26.3 for supported macOS versions

If your device qualifies, update it as soon as possible.

Why this update deserves attention

Security updates can feel routine. Many of us see the notification and decide to deal with it later. This time is different. Apple confirmed the flaw was actively exploited. That means attackers already know how to use it. Running older software gives them a window of opportunity. Updating closes that window.

How to update your iPhone or iPad

Updating takes only a few minutes.

  • Go to Settings
  • Tap General
  • Tap Software Update
  • If an update appears, tap Download and Install
  • Turn on Automatic Updates so you do not miss future fixes

Keep your device connected to Wi-Fi and power during the process.

APPLE WARNS MILLIONS OF IPHONES ARE EXPOSED TO ATTACK

Once you reach this screen on your iPhone, tap Update Now to install Apple’s latest security fix immediately. (Kurt “CyberGuy” Knutsson)

How to update your Mac

  • Click the Apple menu in the upper left corner
  • Choose System Settings or System Preferences
  • Select General
  • Click Software Update
  • If an update appears, select Restart Now or Update Tonight

Your Mac may restart during the process. Keep it plugged in and connected to the internet until the update finishes.

Mac users will see options like Update Tonight or Restart Now, and installing this update closes a flaw already exploited in attacks. (Kurt “CyberGuy” Knutsson)

Advertisement

How to update Apple Watch

  • Keep your Watch on its charger and near your iPhone
  • Open the Watch app on your iPhone
  • Tap General
  • Tap Software Update
  • Tap Download and Install if available

Your Watch will restart during the update.

Your Apple Watch also receives critical security fixes, so keep it on the charger and update it just like your iPhone. (Kurt “CyberGuy” Knutsson)

How to update Apple TV

  • Open Settings on Apple TV
  • Go to System
  • Select Software Updates
  • Choose Update Software
  • Select Download and Install

Stay connected to power and Wi Fi until the update completes.

How to update Safari

Safari updates are included with macOS updates.

  • Go to the Apple menu
  • Click System Settings
  • Select General
  • Click Software Update

If Safari appears separately, click Update Now and restart your Mac.

How to update your Apple Vision Pro

  • Put on your Vision Pro and open the Settings app.
  • Select General from the sidebar.
  • Tap Software Update.
  • If an update appears for visionOS 26.3, choose Download and Install.
  • Make sure your Vision Pro stays charged and connected to Wi-Fi until the update completes.

MALICIOUS MAC EXTENSIONS STEAL CRYPTO WALLETS AND PASSWORDS

Ways to stay safe

Installing this update is the most important step. Still, there are additional habits that strengthen your protection.

  • Turn on automatic updates for every Apple device
  • Restart devices regularly to clear temporary processes
  • Avoid clicking unsolicited links or attachments, and use strong antivirus software. Get my picks for the best 2026 antivirus protection winners for your Windows, Mac, Android and iOS devices at Cyberguy.com.
  • Remember, Apple threat notifications will never ask for passwords or verification codes
  • Be cautious when viewing HTML-formatted emails in Apple Mail
  • Consider enabling Lockdown Mode if you face a higher risk

Cybercriminals rely on hesitation. They count on us assuming we will get to the update later.

Kurt’s key takeaways

Apple moved fast to fix this vulnerability, and that is reassuring. Now it is up to us to do our part. I get it. Updates interrupt your day. They force a restart. They rarely feel urgent. But here is the thing. Installing updates is still the simplest and most effective way to protect your device from active threats. A few minutes now can prevent a serious security problem later.

What is your biggest reason for delaying updates, and has it ever cost you? Let us know by writing to us at Cyberguy.com.

Advertisement

CLICK HERE TO DOWNLOAD THE FOX NEWS APP

Sign up for my FREE CyberGuy Report 
Get my best tech tips, urgent security alerts and exclusive deals delivered straight to your inbox. Plus, you’ll get instant access to my Ultimate Scam Survival Guide – free when you join my CYBERGUY.COM newsletter.

Copyright 2026 CyberGuy.com. All rights reserved.

Continue Reading

Technology

Meta’s new deal with Nvidia buys up millions of AI chips

Published

on

Meta’s new deal with Nvidia buys up millions of AI chips

Meta has struck a multiyear deal to expand its data centers with millions of Nvidia’s Grace and Vera CPUs and Blackwell and Rubin GPUs. While Meta has long been using Nvidia’s hardware for its AI products, this deal “represents the first large-scale Nvidia Grace-only deployment,” which Nvidia says will deliver “significant performance-per-watt improvements in [Meta’s] data centers.” The deal also includes plans to add Nvidia’s next-generation Vera CPUs to Meta’s data centers in 2027.

Meta is also working on its own in-house chips for running AI models, but according to the Financial Times, it has run into “technical challenges and rollout delays” with its chip strategy. Nvidia is also dealing with concerns about depreciation and chip-back loans used to finance AI buildouts, as well as the pressure of competition. CNBC notes that Nvidia’s stock dropped four percent after a November report about Meta considering using Google’s Tensor chips for AI, and late last year, AMD announced chip arrangements with both OpenAI and Oracle.

Nvidia and Meta did not disclose how much the deal cost, but this year’s AI spending from Meta, Microsoft, Google, and Amazon is estimated to cost more than the entire Apollo space program.

Continue Reading

Trending