Michigan
Michigan ranks 34 in 2024 Kids Count data book
LANSING, Mich. (WILX) – New data was released on Monday showing that Michigan ranks 34th in the nation in the 2024 Kids County data book.
According to the newly released data, Michigan has a 40% chronic school absenteeism rate, with over half a million students chronically absent in the 2021-2022 school year.
Among the 1 in 4 children in Michigan who were chronically absent in the 2021-2022 school year, there were significant disparities by race, with more than half of American Indian and Black children chronically absent.
“Michigan’s high absenteeism rate unfortunately comes as no surprise considering that school absence is linked to childhood poverty and trauma. Here in Michigan, 18% of our state’s children are living in poverty, which is slightly above the national average, and nearly half of our state’s kids have gone through at least one adverse childhood experience,” said Monique Stanton, president and CEO of the Michigan League for Public Policy. “These findings underscore the importance of strengthening Michigan families and mitigating childhood poverty through bold state policy decisions so that all of our kids have the solid foundations they need to be present and successful in their classrooms.”
Each year, the Data Book presents national and state data from 16 indicators in four domains — economic well-being, education, health, and family and community factors — and ranks the states according to how children are faring overall. Michigan’s best ranking was, once again, in health at 22nd, largely due to high rates of children with health insurance, while the state came in 31st in economic well-being and 28th in family and community. A continuing positive trend that Michigan has seen for the past 15 years is a decline in teen births. However, in terms of economic well-being, Michigan continues to face significant challenges, with over half a million children living in families where no parent has full-time, year-round employment and 1 in 4 children living in cost-burdened households that spend more than 30% of their income on housing.
Key findings from the most recent school year (2021-2022) show that Michigan remains in the bottom ten states for education at 41st. The percentage of high school students not graduating on time increased for the first time after declining steadily for over a decade, with 1 in 5 Michigan students not completing high school on time. And 72% percent of 4th graders scored below proficient in reading in 2022 — up 6% from 2019 — while 75% of 8th graders scored below proficient in math in 2022 — up 9% from 2019.
“Kids of all ages and grades must have what they need to learn each day, such as enough food and sleep and a safe way to get to school, as well as the additional resources they might need to perform at their highest potential and thrive, like tutoring and mental health services,” said Lisa Hamilton, president and CEO of the Annie E. Casey Foundation. “Our policies and priorities have not focused on these factors in preparing young people for the economy, short-changing a whole generation.”
The Foundation that released the data recommends the following:
- To get kids back on track, we must ensure they arrive at the classroom ready to learn by continuing access to universal free meals, ensuring a reliable internet connection, a place to study, and time with friends, teachers, and counselors.
- Expand access to intensive tutoring for students who are behind in their classes and missing academic milestones. Research has shown that the most effective tutoring is in person, in high dosage, and tied directly to the school.
- States should use all their allocated pandemic relief funding to prioritize students’ social, emotional, academic, and physical well-being. As long as funds are obligated by the Sept. 30 deadline, states should have two more full years to spend them.
- States and school systems should address chronic absence so more students return to learning. While few states gather and report chronic absence data by grade, all of them should. Improving attendance tracking and data will inform future decision-making. Lawmakers should embrace positive approaches rather than criminalizing students or parents due to attendance challenges because they may not understand the consequences of even a few days missed.
- Policymakers should invest in community schools and public schools that provide wraparound support to kids and families. Natural homes for tutoring, mental health support, nutritional aid and other services, community schools use innovative and creative programs to support young learners and encourage parent engagement, which leads to better outcomes for kids.
Subscribe to our News 10 newsletter and YouTube page to receive the latest local news and weather. Looking to hire people, or grow your business through advertising? Gray Digital Media is your one-stop marketing solution. Learn more.
Copyright 2024 WILX. All rights reserved.
GRAND RAPIDS, Mich. (WOOD) — Harmful algal blooms have been reported on two notable lakes in West Michigan: Gun Lake and Muskegon Lake.
The Michigan Department of Environment, Great Lakes and Energy says cyanobacteria was reported on Muskegon Lake July 3, but no tests have confirmed it.
The Barry-Eaton District Health Department says a harmful algal bloom was confirmed Thursday on Gun Lake. The lake remains open, but the BEDHD is encouraging visitors to use caution and avoid water that has “visible algae.”
Visitors are encouraged to avoid any contact with water that appears bright green, blue-green, brown or red or has “floating mats of scum.”
Pets should also avoid the water. If they come into contact with the algae, pets should be rinsed off as soon as possible with clean, fresh water.
Exposure to algae can cause a rash or irritation to the skin, eyes, nose and throat. It can also cause stomach cramps, nausea, vomiting, diarrhea, headache, fever and trouble breathing.
“If you become sick, contact your healthcare provider. Seek medical care right away if you have trouble breathing, severe vomiting, or other serious symptoms,” the BEDHD said in a statement. “If your pet was exposed, rinse them well with clean water and do not let them lick their fur until they have been washed. Contact your veterinarian right away if your pet has vomiting, diarrhea, weakness, trouble walking, excessive drooling, shaking, or seizures.”
Harmful algal blooms are powered by the sudden growth of cyanobacteria, also known as blue-green algae. Cyanobacteria occur naturally in lakes, rivers and ponds but is often boosted by a sudden excess of nutrients, often caused by fertilizer runoff from farms or failed septic systems.
They can last for several days and sometimes even months. The water will look “scummy” or like “spilled paint or pea soup.” They are typically found in the summer and fall — usually peaking in August or September and dying off by the end of October.
You can report a suspected harmful algal bloom to EGLE at AlgaeBloom@Michigan.gov or 1.800.662.9278.
Sterling Stamping Plant is the largest in the world
Ed Daniels, vice president of North America injection and stamping operations, discusses the process of producing metal parts for Stellantis models.
Warren — Hulking metal presses line one wall of Stellantis NV’s cavernous stamping plant here, punching out the raw shapes of Jeep doors, Dodge hoods and Ram tailgates in rapid succession.
Nearby, swinging yellow robots continue the tightly choreographed work, gluing and pressing and welding smaller components to the sheet metal that eventually will start to resemble the shape of a truck or SUV.
Seven miles north, in Sterling Heights, Stellantis operates an even larger stamping plant — the biggest in the world, at 2.7 million square feet — that does much of the same work, churning out various shapes of steel and aluminum 24 hours a day.
Together, these lesser-known links in the manufacturing supply chain support all of Stellantis’ big North American assembly plants — from next-door Warren Truck Assembly Plant, where the Jeep Grand Wagoneer SUV is built, to facilities in Windsor and Mexico that make minivans and pickups.
Inside Stellantis’ Huge Detroit Stamping Plants
The Detroit News recently got a rare look inside the automaker’s Sterling and Warren stamping plants, which are key to the company’s turnaround plan.
The Metro Detroit stamping plants, the automaker’s only two such facilities in the United States, have at times struggled in recent years, facing major job cuts and worker morale issues amid slowing sales and shifting production plans. But under Stellantis CEO Antonio Filosa, the facilities are expected to cram in more workload — and add staff — as Stellantis begins a new five-year strategic turnaround plan, which includes a heavy focus on its most profitable North American market.
The carmaker’s goal: grow sales by more than a third to 1.9 million annually by 2030 as it launches 23 vehicles, including 11 all-new models. The company also is directing billions of dollars of investment into its U.S. manufacturing footprint due to President Donald Trump’s tariffs.
“Stamping has never really been viewed as the sexy side of automotive manufacturing, we’re relatively invisible,” said Ed Daniels Jr., vice president of North America injection and stamping operations. “Because when you look at the commercials and advertisements, it’s always a beautiful Ram rolling off the assembly line or climbing the side of a mountain.
“But we’re the inception of that vehicle,” he said. “This is where raw materials are turned into commodities and parts.”
The Detroit News recently got a rare look inside the two plants that combined employ about 3,000 people. The automaker wanted to show off a newly-installed blanking press at Warren Stamping and other machinery like a high-speed transfer press and a robot that spots flaws in the metal.
Hiring expected
The blanking press unspools long coils of metal and chops them up into pieces that can then be shaped into roofs, fenders and floor pans. Stellantis shipped the massive machine to Warren from its idled Belvidere Assembly Plant in Illinois last year.
After upgrades to the machine, executives said it’s able to produce as many as 120,000 metal blanks per week. It will save Stellantis money since the plant will no longer need to pay a supplier to break down the coils before the metal arrives there.
The blanker addition is a big deal for the plant and signals that the company wants to bring more work in-house and invest in the facility over the coming years, said Romaine McKinney III, president of United Auto Workers Local 869, which represents workers at the factory.
The plant has already brought back all of its laid-off UAW workers, and McKinney said he anticipates more hiring to get underway if sales grow and new Stellantis vehicles come to market.
In another corner of the Warren facility, one of the fastest press lines in the world — known internally as the Hellcat — pushes as many as 15 pieces of metal through per minute. Dies that weigh up to 50 tons apiece squish the material into the shapes of doors and hoods before robotic arms snatch them out and place them on conveyor belts. Midway through a shift, workers can reconfigure the machine to make a different component, a process that takes just five minutes.
Robots check for quality
Curtis Booth, who manages Warren Stamping, said manual processes inside the plant have become increasingly automated, and safer, over the last couple decades, even as the automaker’s two stamping factories still utilize some presses that were installed in the 1960s.
The latest high-tech addition is the Automated Body Inspection System, or ABIS. It’s a camera system mounted on a robot that automatically checks the quality of components and flags anything in need of repair.
Auto plants of all kinds are increasingly turning to these types of camera systems, infused with artificial intelligence, to catch flaws in sheet metal and other components before they are shipped. Booth said worker visual inspections are still used. But in some cases the human eye has too much subjectivity, and the ABIS removes the guesswork.
Greg Bauer, who manages Sterling Stamping, said his plant has added staff over the past year, and expects to continue hiring as more work is assigned to the facility. There is no space at the plant to add more presses, but officials have figured out how to increase efficiency — quickly toggling back and forth between making doors for a Chrysler Pacifica and Dodge Charger on on a single machine, for example.
“We want to bring high-volume parts into the plant, and we want to maximize the capacity of the equipment,” Daniels said.
lramseth@detroitnews.com
MENOMINEE, Mich. (WLUK) — 24-year-old Ethan Raymond Masters of Menominee was arrested on sexual assault charges June 30th, according to the Menominee County Sheriff’s Office.
According to a news release from the Sheriff’s Office, deputies learned of an incident involving a 24-year-old man and a 12-year-old girl which happened in Menominee June 22nd. Following a sexual assault investigation, police charged Masters.
Masters was arraigned July 2nd on 2 counts of Criminal Sexual Conduct First Degree. He remains in the Menominee County Jail on a $250,000 cash bond.
Menominee City Police and the Michigan State Police Crime Laboratory of Marquette assisted with the investigation.
-
Austin, TX1 minute agoTexas Has One Trait Almost Every National Champion Shares
-
Alabama8 minutes agoFinal 2026 MLB mock draft projections for Alabama’s Justin Lebron
-
Alaska11 minutes agoWatch My Buddy Matt Not Get Eaten by Bears in Alaska
-
Arizona16 minutes agoRoller derby still has a home in Arizona despite myriad obstacles
-
Arkansas23 minutes agoFreshman OL Tucker Young never wavered through Arkansas football coaching changes | Whole Hog Sports
-
California26 minutes agoNorthern California high school graduation shooting suspect arrested in Texas
-
Colorado31 minutes agoColorado to weigh daily hunting limits, ban on fur sales for wildlife hunted for fur
-
Connecticut38 minutes agoWoman arrested, accused of murdering man in Farmington in March
