Connect with us

Technology

RedCap, the 5G for wearables and IoT, will get its first devices soon

Published

on

RedCap, the 5G for wearables and IoT, will get its first devices soon

Both T-Mobile and AT&T have plans to release their first devices soon that run on RedCap, a 5G specification that is tooled for Internet of Things devices, according to Fierce Wireless.

What is RedCap? Great question! Also called “reduced capability” or NR-Light, RedCap is a low-bandwidth version of 5G that’s expected to make certain devices, like wearables, sensors, or surveillance cameras simpler and more power efficient, according to an Oracle document. That could mean cheaper cellular-connected smartwatches, XR glasses, or other portable products that don’t need high-powered antennas and fast throughput last longer on a charge.

AT&T, which began testing the spec on its own network early this year, reportedly plans to release its first NR-Light devices in 2025, Fierce Wireless writes. T-Mobile will launch one of its own before this year is out.

It’s not clear what those devices will be, but AT&T AVP of device architecture Jason Silkes has hinted at what early NR-Light products could look like, telling Fierce in June that the first RedCap devices will probably be cheap mobile hotspots and dongles. Indeed, TCL announced a 5G USB dongle last week, catchily named the TCL Linkport IK511.

Early products could use a modem chipset Qualcomm launched last year called the Snapdragon X35. It listed several companies in its announcement, including T-Mobile and AT&T, that plan to use the modem in future products. Perhaps we’ll hear more during CES early next year. Let the (slow) race to 5G begin.

Advertisement
Continue Reading
Advertisement
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Technology

This wildfire evacuation alert accidentally went out to everyone in LA

Published

on

This wildfire evacuation alert accidentally went out to everyone in LA

After two days of dealing with wildfires that have burned thousands of acres, residents across Los Angeles County received a wildfire evacuation alert on Thursday afternoon that was a mistake. Shortly after, officials sent a follow-up alert saying that the notice was intended only for people near the Kenneth Fire in Woodland Hills.

Los Angeles County shared a message on X explaining what happened: “An evacuation order for residents near the Kenneth Fire currently burning in West Hills was mistakenly issued Countywide. This alert was only intended for residents of Calabasas and Agoura Hills.”

CBS News quotes a local official who said that the alert, which included a broken URL, was sent “due to a technical error.”

This is the alert to disregard the other evacuation warning.
Image: The Verge

Many wildfires are burning in the LA area, and officials have confirmed at least six deaths, CNN reports. LA County has a population of nearly 10 million people, which is the “largest population of any county in the nation,” according to the county’s website.

Advertisement
Continue Reading

Technology

Solar device transforms used tires to help purify water so that it's drinkable

Published

on

Solar device transforms used tires to help purify water so that it's drinkable

Imagine a world where clean drinking water is readily available even in the most remote areas.

This vision is becoming a reality thanks to innovative research from scientists in Canada. 

A team of scientists at Dalhousie University in Halifax, Nova Scotia, has developed a groundbreaking device that could revolutionize water desalination, offering hope to millions facing water scarcity worldwide.

I’M GIVING AWAY THE LATEST & GREATEST AIRPODS PRO 2

Floating solar still process (Dalhousie University)

Advertisement

The power of plasmonic solar stills

At the heart of this innovation is a floating solar still, a device that harnesses the sun’s energy to purify seawater. 

Dr. Mita Dasog, an associate professor of chemistry and Killam Memorial chair at Dalhousie, explains the science behind it: “Refractory plasmonic nanomaterials are very good at capturing light and converting that light into heat.”

This principle forms the foundation of their ingenious design. The solar still, conceptualized by Dr. Matthew Margeson during his Ph.D. studies, addresses challenges that have long plagued similar devices. It minimizes thermal losses, prevents salt buildup and can withstand harsh maritime conditions.

solar device 2

Researcher pictured next to floating solar still (Matthew J. Margeson)

A BREAKTHROUGH GADGET COULD HELP YOU DETECT MICROPLASTICS IN YOUR DRINKING WATER

How it works

The floating solar still operates through an elegantly simple yet highly effective process. First, ocean water is drawn up to the device’s foam surface through a wicking system. Once the water reaches the surface, it is evaporated by solar-heated plasmonic materials. As the water vapor rises, the salt is left behind, ensuring that only purified water is collected. The vapor then recondenses on a clear plastic dome situated above the device. Finally, the purified water is funneled down the sides of the dome and collected in a sealed bag for easy access.

Advertisement

The results of this process are impressive. In real-world tests conducted in Halifax Harbour, the device produced up to 0.97 gallons of clean water daily, which was a record-breaking yield for passive floating solar stills.

WHAT IS ARTIFICIAL INTELLIGENCE (AI)?

solar device 3

Floating solar still process (Dalhousie University)

AUTONOMOUS TRASH-GOBBLING ROBO BOAT WAGES WAR ON WATERWAY WASTE

Upcycling for sustainability

What sets this device apart is its use of unconventional materials. Instead of relying on expensive precious metals, the team turned to an unlikely source: used tires. Through a process called pyrolysis, carbon waste from tires is transformed into a crucial component of the desalination unit.

Dr. Dasog emphasizes the importance of accessibility: “We shouldn’t be making an expensive or very complicated device. It has to be easy to manufacture, last for a long time and be easy to take apart and move.” This approach not only makes the technology more affordable but also addresses the environmental issue of tire waste.

Advertisement

solar device 4

Floating solar still process (Dalhousie University)

THE SHAPE-SHIFTING UNDERWATER ROBOT PIONEERING THE DEPTHS OF THE SEA

Affordable water purification and energy generation in one device

The device’s capabilities extend beyond water purification. It can simultaneously desalinate, disinfect and decontaminate water at a remarkably low cost: less than one cent per liter. It can also generate a small amount of thermoelectricity, potentially powering onboard water quality sensors.

SUBSCRIBE TO KURT’S YOUTUBE CHANNEL FOR QUICK VIDEO TIPS ON HOW TO WORK ALL OF YOUR TECH DEVICES

Looking ahead

The team’s next step is to conduct further testing in South Asia, with the ultimate goal of making the device available worldwide. Dasog, nominated for the Emerging Leader award at the Water Canada Summit, envisions the device as a lifeline for communities displaced by war or climate change.

Advertisement

Kurt’s key takeaways

As we tackle the growing challenges of water security, innovations like the plasmonic solar still shine a light of hope. By blending cutting-edge science with sustainable materials, the researchers at Dalhousie University are doing more than just purifying water; they’re paving the way for a future that is both equitable and resourceful. This device not only makes clean drinking water accessible but also highlights how we can use renewable energy sources to address pressing global issues.

If the sun could power one solution to improve human life, what would you want it to be? Let us know by writing us at Cyberguy.com/Contact.

For more of my tech tips and security alerts, subscribe to my free CyberGuy Report Newsletter by heading to Cyberguy.com/Newsletter.

Ask Kurt a question or let us know what stories you’d like us to cover.

Advertisement

Follow Kurt on his social channels:

Answers to the most asked CyberGuy questions:

New from Kurt:

Copyright 2025 CyberGuy.com. All rights reserved.

Advertisement
Continue Reading

Technology

X launches Grok’s iPhone app in the US

Published

on

X launches Grok’s iPhone app in the US

xAI has released an iOS app in the US for its Grok chatbot, as spotted earlier by TechCrunch. The standalone app version of the chatbot, which xAI calls a beta, can perform the same functions as the one built into X, as it can field real-time information, answer questions, and generate images.

xAI started testing Grok’s standalone iOS app in December in a handful of countries. There’s no word on when it may come to Android.

Though Grok was initially only available to X Premium subscribers, the platform started letting all users access the chatbot last month, bringing it in line with other free-to-use chatbots like OpenAI’s ChatGPT, Anthropic’s Claude, Google Gemini, and Microsoft Copilot.

As pointed out by TechCrunch, it seems xAI is also working on a dedicated Grok.com website that currently has a “coming soon” message on it. After raising $6 billion in June, xAI reported another $6 billion funding round, including from “strategic investors” like Nvidia and AMD.

Continue Reading

Trending