Connect with us

Milwaukee, WI

Milwaukee Tool Launches M18 Brushless Hydraulic Pump From: Milwaukee Tool Corp.

Published

on

Milwaukee Tool Launches M18 Brushless Hydraulic Pump From: Milwaukee Tool Corp.


The hydraulic pump can be used for lifting equipment to perform maintenance, wedging material or equipment apart to gain clearance or splitting nuts to replace a flange.

Milwaukee Tool

Milwaukee Tool has introduced the M18 Brushless Single Acting 10,000-psi Hydraulic Pump, serving as a direct replacement for manual hand pumps. Milwaukee’s single-acting hydraulic pump pushes fluid to the connected hydraulic cylinder or tool to lift, push, pull, punch, cut, split or spread materials.

The hydraulic pump can be used for lifting equipment to perform maintenance, wedging material or equipment apart to gain clearance or splitting nuts to replace a flange. 

Advertisement

The pump features 60 in3 of usable oil to extend a variety of different tonnage and stroke length cylinders to full stroke and is fully compatible with existing 10,000-psi single-acting rated hydraulic hoses, cylinders and tools.  

To control the return flow, a manual valve allows control when releasing pressure and a bladder window allows users to gauge the fluid level. When paired with an M18 REDLITHIUM XC5.0 Battery Pack, the hydraulic pump can complete up to 20 lifts*, 100 splits** or 175 spreads*** on a single charge.  

The M18 Brushless Single Acting 10,000-psi Hydraulic Pump is fully compatible with the entire M18 line, now offering more than 250 power tool solutions. 

Specifications 

M18 Brushless Single Acting 60 in3 10,000-psi Hydraulic Pump (3120-21) 

Advertisement
  • Maximum Operating Pressure: 10,000 psi 
  • Cylinder Compatibility: Single Acting 
  • Reservoir Capacity: 60 in3  
  • Output Flow Rate (No-Load): 18 in3/minute 
  • Output Flow Rate (9,500psi): 10 in3/minute 
  • Valve Operation: Manual 
  • Trigger Lock-Out: Yes 
  • Compatible with: Cone poppet and ball poppet male quick connect couplers 
  • Weight (with M18 REDLITHIUM XC5.0): 12.6 lbs.  
  • Length (with M18 REDLITHIUM XC5.0): 18 in.  
  • Height (Tool-Only): 9.5 in.  
  • Width (Tool-Only): 5.4 in.

Kit Includes: (1) M18 Brushless Single Acting 60in3 10,000-psi Hydraulic Pump, (1) M18 REDLITHIUM XC5.0 Battery Pack, (1) M18 and M12 Multi-Voltage Charger, (1) Shoulder Strap and (1) 3/8-in. NPTF Female Quick Connect Cone Poppet Coupler 

*Simulated Lift with 10T, 4-in. Cylinder at 7,000 psi 

** Splits 1-in. 8TPI Grade-5 Nuts 

***Simulated Spread with 1T Spreader at 7,000 psi 



Source link

Advertisement

Milwaukee, WI

Four new community-powered fridges open on Milwaukee’s North Side

Published

on

Four new community-powered fridges open on Milwaukee’s North Side


Community members and city leaders celebrated the opening of four new community-powered fridges on the North Side of Milwaukee. A ribbon-cutting ceremony was held on Friday, Feb. 27, at Metcalfe Park Community Bridges, 3624 W. North Ave., to mark the occasion. 

The effort to fight food scarcity by opening community-powered fridges comes after several grocery stores closed in the area, creating a food desert.

Ald. Russell W. Stamper, II, emceed the ribbon cutting ceremony for the grand opening of four new community-powered fridges.


District 15 Ald. Russell W. Stamper II, who saw several grocery stores in his district close over the past few years, served as the event’s emcee. 

Advertisement

“We could either complain about the problem, or we could come together to find a solution,” Stamper said.

People fill up the community-powered fridge with fresh produce.


In July 2025, a Pick ‘n Save on the North Side closed, prompting the opening of a community-powered fridge at Tricklebee Café in the Sherman Park and Uptown area. Since then, several other grocery stores have closed in the area.

This led Stamper, FEED MKE, Metcalfe Park Community Bridges and One MKE to open four more community-powered fridges.

Christie Melby-Gibbons, executive director of Tricklebee Café, talks about opening the first community-powered fridge at her cafe.


Christie Melby-Gibbons, executive director of Tricklebee Café, talked about the organization’s community-powered fridge. About a week ago, the fridge was empty for the first time since its launch, so staff turned to their online community for support. 

“Within 20 minutes, a woman came in with bags of food and filled the fridge for less than $100,” Melby-Gibbons said.

Advertisement


Danell Cross (right), executive director at Metcalfe Park Community Bridges, Metcalfe Park resident Farina Brooks (left), and other attendees applaud during the ribbon-cutting ceremony.


The community-powered fridge network is run by residents on a take-what-you-need, leave-what-you-can model. Taking a grassroots approach to solving food insecurity in the area, community members provide fresh produce and other healthy food options to ensure that their neighbors have access to nutritious foods.

Residents line up to fill the community-powered fridge with fresh produce.


“Everybody deserves to eat. I can’t go to sleep at night knowing my neighbors are hungry,” said Melody McCurtis, deputy director of Metcalfe Park Community Bridges.

Melody McCurtis, deputy director at Metcalfe Park Community Bridges, talks about the importance of everyone having access to fresh, healthy food.


Here’s a list of all the community-powered fridges:

Metcalfe Park Community Bridges

3624 W. North Ave.

Advertisement

Rooted & Rising- Washington Park

3940 W. Lisbon Ave.

Sherman Park Community Association

3526 W. Fond du Lac Ave.


Advertisement

Dominican Center

2470 W. Locust St.

Tricklebee Café

4424 W. North Ave.


Jonathan Aguilar is a visual journalist at Milwaukee Neighborhood News Service who is supported through a partnership between CatchLight Local and Report for America.

Advertisement

This article first appeared on Milwaukee Neighborhood News Service and is republished here under a Creative Commons Attribution-NoDerivatives 4.0 International License.





Source link

Continue Reading

Milwaukee, WI

At the Bar

Published

on

At the Bar


The bar can be “the place” where memories are made, friendships blossom, and stories live forever. This episode of Real Stories MKE features stories from Dasha Kelly, Kristia Wildflower, Shep Crumrine, and Katelyn Nye. Real Stories MKE is hosted by Kim Shine and Joel Dresang with support from producer Jasmine Gonzalez and audio engineer Sam Woods.



Source link

Continue Reading

Milwaukee, WI

Pat Murphy Hints Brewers Landed Star Infielder in Caleb Durbin Trade

Published

on

Pat Murphy Hints Brewers Landed Star Infielder in Caleb Durbin Trade


The Milwaukee Brewers were one of the more active teams in the league this offseason and it was one of the more shocking storylines to follow all winter.

They opted to trade Freddy Peralta to the New York Mets, which was a blockbuster deal, but it was expected. Peralta was on an expiring contract, and the Brewers were unlikely to be able to land a long-term deal with him. Milwaukee would much rather have control of Brandon Sproat and Jett Williams for the next five to seven years rather than a singular year of Peralta.

But they also traded Isaac Collins to the Kansas City Royals and Caleb Durbin to the Boston Red Sox. The Collins deal was a head scratcher, but the Durbin deal was the most shocking move of Milwaukee’s offseason.

Advertisement

If you like our content, choose Sports Illustrated as a preferred source on Google.

Advertisement

The Brewers traded Durbin and two other infielders to Boston in exchange for Kyle Harrison, David Hamilton, and Shane Drohan. Harrison is the biggest addition of the trade. Drohan has already flashed dominant potential this spring. Hamilton, who struggled last season, seemingly has the full belief of Brewers manager Pat Murphy.

David Hamilton could soon become a star for the Brewers

Advertisement

Milwaukee Brewers infielder David Hamilton fields a grounder during spring training workouts Monday, February 16, 2026, at American Family Fields of Phoenix in Phoenix, Arizona. | Dave Kallmann / Milwaukee Journal Sentinel / USA TODAY NETWORK via Imagn Images

“He’s got so much ability in there, and he’s got experience, and he might be a utility player but I think he can be really good for us. I think he can take his offensive game to a whole other level,” Murphy said when talking about Hamilton, per Brewers beat writer Adam McCalvy.

Last season, Hamilton slashed .198/.257/.333 with a .590 OPS and a 63 OPS+. It was his third year in the big leagues and his second full year at the level and he’s yet to post an OPS+ over 100. But he’s still been worth 3.6 WAR over the last two years because of his defense and baserunning. The issue has been his bat. Even when he hit .248 in 2024, his OPS was under .700.

But Murphy seemingly believes Hamilton could take the next step at the plate, which would set him up to be a very good platoon infielder and versatile bat. He has the chance to quietly develop into a star with the Brewers if he can get his OPS over .700 and closer to .750. Obviously, this isn’t going to be easy, but Murphy seems to believe he’s closer to this breakout than many fans assume.

Advertisement



Source link

Continue Reading

Trending